=encoding utf8

=head1 NAME

Mail::Transport::Send - send a message

=head1 INHERITANCE

 Mail::Transport::Send
   is a Mail::Transport
   is a Mail::Reporter

 Mail::Transport::Send is extended by
   Mail::Transport::Exim
   Mail::Transport::Mailx
   Mail::Transport::Qmail
   Mail::Transport::SMTP
   Mail::Transport::Sendmail

=head1 SYNOPSIS

 my $message = Mail::Message->new(...);

 # Some extensions implement sending:
 $message->send;
 $message->send(via => 'sendmail');

 my $sender = Mail::Transport::SMTP->new(...);
 $sender->send($message);

=head1 DESCRIPTION

Send a message to the destinations as specified in the header.  The
C<Mail::Transport::Send> module is capable of autodetecting which of the
following modules work on your system; you may simply call C<send>
without C<via> options to get a message transported.

=over 4

=item * L<Mail::Transport::Sendmail|Mail::Transport::Sendmail>

Use sendmail to process and deliver the mail.  This requires the
C<sendmail> program to be installed on your system.  Whether this
is an original sendmail, or a replacement from Postfix does matter.

=item * L<Mail::Transport::Exim|Mail::Transport::Exim>

Use C<exim> to distribute the message.

=item * L<Mail::Transport::Qmail|Mail::Transport::Qmail>

Use C<qmail-inject> to distribute the message.

=item * L<Mail::Transport::SMTP|Mail::Transport::SMTP>

In this case, Perl is handling mail transport on its own.  This is
less desired but more portable than sending with sendmail or qmail.
The advantage is that this sender is environment independent, and easier
to configure.  However, there is no daemon involved which means that
your program will wait until the message is delivered, and the message
is lost when your program is interrupted during delivery (which may take
hours to complete).

=item * L<Mail::Transport::Mailx|Mail::Transport::Mailx>

Use the external C<mail>, C<mailx>, or C<Mail> programs to send the
message.  Usually, the result is poor, because some versions of these
programs do not support MIME headers.  Besides, these programs are
known to have exploitable security breaches.

=back

Extends L<"DESCRIPTION" in Mail::Transport|Mail::Transport/"DESCRIPTION">.
 
=head1 METHODS

Extends L<"METHODS" in Mail::Transport|Mail::Transport/"METHODS">.
 
=head2 Constructors

Extends L<"Constructors" in Mail::Transport|Mail::Transport/"Constructors">.
 
=over 4

=item Mail::Transport::Send-E<gt>B<new>(%options)

 -Option    --Defined in     --Default
  executable  Mail::Transport  undef
  hostname    Mail::Transport  'localhost'
  interval    Mail::Transport  30
  log         Mail::Reporter   'WARNINGS'
  password    Mail::Transport  undef
  port        Mail::Transport  undef
  proxy       Mail::Transport  undef
  retry       Mail::Transport  <false>
  timeout     Mail::Transport  120
  trace       Mail::Reporter   'WARNINGS'
  username    Mail::Transport  undef
  via         Mail::Transport  'sendmail'

=over 2

=item executable => FILENAME

=item hostname => HOSTNAME|ARRAY

=item interval => SECONDS

=item log => LEVEL

=item password => STRING

=item port => INTEGER

=item proxy => PATH

=item retry => NUMBER|undef

=item timeout => SECONDS

=item trace => LEVEL

=item username => STRING

=item via => CLASS|NAME

=back

=back

=head2 Sending mail

=over 4

=item $obj-E<gt>B<destinations>( $message, [$address|ARRAY] )

Determine the destination for this message.  If a valid $address is defined,
this is used to overrule the addresses within the message.  If the $address
is C<undef> it is ignored.  It may also be an ARRAY of addresses.

If no $address is specified, the message is scanned for resent groups
(see L<Mail::Message::Head::Complete::resentGroups()|Mail::Message::Head::Complete/"Access to the header">).  The addresses
found in the first (is latest added) group are used.  If no resent groups
are found, the normal C<To>, C<Cc>, and C<Bcc> lines are taken.

=item $obj-E<gt>B<putContent>($message, $fh, %options)

Print the content of the $message to the $fh.

 -Option     --Default
  body_only    <false>
  undisclosed  <false>

=over 2

=item body_only => BOOLEAN

Print only the body of the message, not the whole.

=item undisclosed => BOOLEAN

Do not print the C<Bcc> and C<Resent-Bcc> lines.  Default false, which
means that they are not printed.

=back

=item $obj-E<gt>B<send>($message, %options)

Transmit the $message, which may be anything what can be coerced into a
L<Mail::Message|Mail::Message>, so including Mail::Internet and MIME::Entity
messages.  It returns true when the transmission was successfully completed.

 -Option  --Default
  interval  new(interval)
  retry     new(retry)
  to        undef

=over 2

=item interval => SECONDS

=item retry => INTEGER

=item to => STRING

Overrules the destination(s) of the message, which is by default taken
from the (Resent-)To, (Resent-)Cc, and (Resent-)Bcc.

=back

=item $obj-E<gt>B<trySend>($message, %options)

Try to send the message. This will return true if successful, and
false in case some problems where detected.  The C<$?> contains
the exit status of the command which was started.

=back

=head2 Server connection

Extends L<"Server connection" in Mail::Transport|Mail::Transport/"Server connection">.
 
=over 4

=item $obj-E<gt>B<findBinary>( $name, [@directories] )

Inherited, see L<Mail::Transport/"Server connection">

=item $obj-E<gt>B<remoteHost>()

Inherited, see L<Mail::Transport/"Server connection">

=item $obj-E<gt>B<retry>()

Inherited, see L<Mail::Transport/"Server connection">

=back

=head2 Error handling

Extends L<"Error handling" in Mail::Transport|Mail::Transport/"Error handling">.
 
=over 4

=item $obj-E<gt>B<AUTOLOAD>()

Inherited, see L<Mail::Reporter/"Error handling">

=item $obj-E<gt>B<addReport>($object)

Inherited, see L<Mail::Reporter/"Error handling">

=item $obj-E<gt>B<defaultTrace>( [$level]|[$loglevel, $tracelevel]|[$level, $callback] )

=item Mail::Transport::Send-E<gt>B<defaultTrace>( [$level]|[$loglevel, $tracelevel]|[$level, $callback] )

Inherited, see L<Mail::Reporter/"Error handling">

=item $obj-E<gt>B<errors>()

Inherited, see L<Mail::Reporter/"Error handling">

=item $obj-E<gt>B<log>( [$level, [$strings]] )

=item Mail::Transport::Send-E<gt>B<log>( [$level, [$strings]] )

Inherited, see L<Mail::Reporter/"Error handling">

=item $obj-E<gt>B<logPriority>($level)

=item Mail::Transport::Send-E<gt>B<logPriority>($level)

Inherited, see L<Mail::Reporter/"Error handling">

=item $obj-E<gt>B<logSettings>()

Inherited, see L<Mail::Reporter/"Error handling">

=item $obj-E<gt>B<notImplemented>()

Inherited, see L<Mail::Reporter/"Error handling">

=item $obj-E<gt>B<report>( [$level] )

Inherited, see L<Mail::Reporter/"Error handling">

=item $obj-E<gt>B<reportAll>( [$level] )

Inherited, see L<Mail::Reporter/"Error handling">

=item $obj-E<gt>B<trace>( [$level] )

Inherited, see L<Mail::Reporter/"Error handling">

=item $obj-E<gt>B<warnings>()

Inherited, see L<Mail::Reporter/"Error handling">

=back

=head2 Cleanup

Extends L<"Cleanup" in Mail::Transport|Mail::Transport/"Cleanup">.
 
=over 4

=item $obj-E<gt>B<DESTROY>()

Inherited, see L<Mail::Reporter/"Cleanup">

=back

=head1 DIAGNOSTICS

=over 4

=item Warning: Message has no destination

It was not possible to figure-out where the message is intended to go
to.

=item Error: Package $package does not implement $method.

Fatal error: the specific package (or one of its superclasses) does not
implement this method where it should. This message means that some other
related classes do implement this method however the class at hand does
not.  Probably you should investigate this and probably inform the author
of the package.

=item Warning: Resent group does not specify a destination

The message which is sent is the result of a bounce (for instance
created with L<Mail::Message::bounce()|Mail::Message::Construct::Bounce/"Constructing a message">), and therefore starts with a
C<Received> header field.  With the C<bounce>, the new destination(s)
of the message are given, which should be included as C<Resent-To>,
C<Resent-Cc>, and C<Resent-Bcc>.

The C<To>, C<Cc>, and C<Bcc> header information is only used if no
C<Received> was found.  That seems to be the best explanation of the RFC.

As alternative, you may also specify the C<to> option to some of the senders
(for instance L<Mail::Transport::SMTP::send(to)|Mail::Transport::Send/"Sending mail"> to overrule any information
found in the message itself about the destination.

=item Error: Transporters of type $class cannot send.

The L<Mail::Transport|Mail::Transport> object of the specified type can not send messages,
but only receive message.

=back

=head1 SEE ALSO

This module is part of Mail-Transport distribution version 3.004,
built on May 03, 2019. Website: F<http://perl.overmeer.net/CPAN/>

=head1 LICENSE

Copyrights 2001-2019 by [Mark Overmeer]. For other contributors see ChangeLog.

This program is free software; you can redistribute it and/or modify it
under the same terms as Perl itself.
See F<http://dev.perl.org/licenses/>