package Mojo::IOLoop;
use Mojo::Base 'Mojo::EventEmitter';

# "Professor: Amy, technology isn't intrinsically good or evil. It's how it's
#             used. Like the death ray."
use Carp qw(croak);
use Mojo::IOLoop::Client;
use Mojo::IOLoop::Server;
use Mojo::IOLoop::Stream;
use Mojo::IOLoop::Subprocess;
use Mojo::Reactor::Poll;
use Mojo::Util   qw(md5_sum steady_time);
use Scalar::Util qw(blessed weaken);

use constant DEBUG => $ENV{MOJO_IOLOOP_DEBUG} || 0;

has max_accepts     => 0;
has max_connections => 1000;
has reactor         => sub {
  my $class = Mojo::Reactor::Poll->detect;
  warn "-- Reactor initialized ($class)\n" if DEBUG;
  return $class->new->catch(sub { warn "@{[blessed $_[0]]}: $_[1]" });
};

# Ignore PIPE signal
$SIG{PIPE} = 'IGNORE';

# Initialize singleton reactor early
__PACKAGE__->singleton->reactor;

sub acceptor {
  my ($self, $acceptor) = (_instance(shift), @_);

  # Find acceptor for id
  return $self->{acceptors}{$acceptor} unless ref $acceptor;

  # Connect acceptor with reactor
  $self->{acceptors}{my $id = $self->_id} = $acceptor->reactor($self->reactor);

  # Allow new acceptor to get picked up
  $self->_not_accepting->_maybe_accepting;

  return $id;
}

sub client {
  my ($self, $cb) = (_instance(shift), pop);

  my $id     = $self->_id;
  my $client = $self->{out}{$id}{client} = Mojo::IOLoop::Client->new(reactor => $self->reactor);

  weaken $self;
  $client->on(
    connect => sub {
      delete $self->{out}{$id}{client};
      my $stream = Mojo::IOLoop::Stream->new(pop);
      $self->_stream($stream => $id);
      $self->$cb(undef, $stream);
    }
  );
  $client->on(error => sub { $self->_remove($id); $self->$cb(pop, undef) });
  $client->connect(@_);

  return $id;
}

sub is_running { _instance(shift)->reactor->is_running }

sub next_tick {
  my ($self, $cb) = (_instance(shift), @_);
  weaken $self;
  return $self->reactor->next_tick(sub { $self->$cb });
}

sub one_tick {
  my $self = _instance(shift);
  croak 'Mojo::IOLoop already running' if $self->is_running;
  $self->reactor->one_tick;
}

sub recurring { shift->_timer(recurring => @_) }

sub remove {
  my ($self, $id) = (_instance(shift), @_);
  my $c = $self->{in}{$id} || $self->{out}{$id};
  if ($c && (my $stream = $c->{stream})) { return $stream->close_gracefully }
  $self->_remove($id);
}

sub reset {
  my ($self, $options) = (_instance(shift), shift // {});

  $self->emit('reset')->stop;
  if ($options->{freeze}) {
    state @frozen;
    push @frozen, {%$self};
    delete $self->{reactor};
  }
  else { $self->reactor->reset }

  delete @$self{qw(accepting acceptors events in out stop)};
}

sub server {
  my ($self, $cb) = (_instance(shift), pop);

  my $server = Mojo::IOLoop::Server->new;
  weaken $self;
  $server->on(
    accept => sub {
      my $stream = Mojo::IOLoop::Stream->new(pop);
      $self->$cb($stream, $self->_stream($stream, $self->_id, 1));

      # Enforce connection limit (randomize to improve load balancing)
      if (my $max = $self->max_accepts) {
        $self->{accepts} //= $max - int rand $max / 2;
        $self->stop_gracefully if ($self->{accepts} -= 1) <= 0;
      }

      # Stop accepting if connection limit has been reached
      $self->_not_accepting if $self->_limit;
    }
  );
  $server->listen(@_);

  return $self->acceptor($server);
}

sub singleton { state $loop = shift->new }

sub start {
  my $self = _instance(shift);
  croak 'Mojo::IOLoop already running' if $self->is_running;
  $self->reactor->start;
}

sub stop { _instance(shift)->reactor->stop }

sub stop_gracefully {
  my $self = _instance(shift)->_not_accepting;
  ++$self->{stop} and !$self->emit('finish')->_in and $self->stop;
}

sub stream {
  my ($self, $stream) = (_instance(shift), @_);
  return $self->_stream($stream => $self->_id) if ref $stream;
  my $c = $self->{in}{$stream} || $self->{out}{$stream} // {};
  return $c->{stream};
}

sub subprocess {
  my $subprocess = Mojo::IOLoop::Subprocess->new(ioloop => _instance(shift));
  return @_ ? $subprocess->run(@_) : $subprocess;
}

sub timer { shift->_timer(timer => @_) }

sub _id {
  my $self = shift;
  my $id;
  do { $id = md5_sum 'c' . steady_time . rand } while $self->{in}{$id} || $self->{out}{$id} || $self->{acceptors}{$id};
  return $id;
}

sub _in { scalar keys %{shift->{in} // {}} }

sub _instance { ref $_[0] ? $_[0] : $_[0]->singleton }

sub _limit { $_[0]{stop} ? 1 : $_[0]->_in >= $_[0]->max_connections }

sub _maybe_accepting {
  my $self = shift;
  return if $self->{accepting} || $self->_limit;
  $_->start for values %{$self->{acceptors} // {}};
  $self->{accepting} = 1;
}

sub _not_accepting {
  my $self = shift;
  return $self unless delete $self->{accepting};
  $_->stop for values %{$self->{acceptors} // {}};
  return $self;
}

sub _out { scalar keys %{shift->{out} // {}} }

sub _remove {
  my ($self, $id) = @_;

  # Timer
  return undef unless my $reactor = $self->reactor;
  return undef if $reactor->remove($id);

  # Acceptor
  return $self->_not_accepting->_maybe_accepting if delete $self->{acceptors}{$id};

  # Connection
  return undef unless delete $self->{in}{$id} || delete $self->{out}{$id};
  return $self->stop if $self->{stop} && !$self->_in;
  $self->_maybe_accepting;
  warn "-- $id <<< $$ (@{[$self->_in]}:@{[$self->_out]})\n" if DEBUG;
}

sub _stream {
  my ($self, $stream, $id, $server) = @_;

  # Connect stream with reactor
  $self->{$server ? 'in' : 'out'}{$id}{stream} = $stream->reactor($self->reactor);
  warn "-- $id >>> $$ (@{[$self->_in]}:@{[$self->_out]})\n" if DEBUG;
  weaken $self;
  $stream->on(close => sub { $self && $self->_remove($id) });
  $stream->start;

  return $id;
}

sub _timer {
  my ($self, $method, $after, $cb) = (_instance(shift), @_);
  weaken $self;
  return $self->reactor->$method($after => sub { $self->$cb });
}

1;

=encoding utf8

=head1 NAME

Mojo::IOLoop - Minimalistic event loop

=head1 SYNOPSIS

  use Mojo::IOLoop;

  # Listen on port 3000
  Mojo::IOLoop->server({port => 3000} => sub ($loop, $stream, $id) {
    $stream->on(read => sub ($stream, $bytes) {
      # Process input chunk
      say $bytes;

      # Write response
      $stream->write('HTTP/1.1 200 OK');
    });
  });

  # Connect to port 3000
  my $id = Mojo::IOLoop->client({port => 3000} => sub ($loop, $err, $stream) {
    $stream->on(read => sub ($stream, $bytes) {
      # Process input
      say "Input: $bytes";
    });

    # Write request
    $stream->write("GET / HTTP/1.1\x0d\x0a\x0d\x0a");
  });

  # Add a timer
  Mojo::IOLoop->timer(5 => sub ($loop) { $loop->remove($id) });

  # Start event loop if necessary
  Mojo::IOLoop->start unless Mojo::IOLoop->is_running;

=head1 DESCRIPTION

L<Mojo::IOLoop> is a very minimalistic event loop based on L<Mojo::Reactor>, it has been reduced to the absolute
minimal feature set required to build solid and scalable non-blocking clients and servers.

Depending on operating system, the default per-process and system-wide file descriptor limits are often very low and
need to be tuned for better scalability. The C<LIBEV_FLAGS> environment variable should also be used to select the best
possible L<EV> backend, which usually defaults to the not very scalable C<select>.

  LIBEV_FLAGS=1    # select
  LIBEV_FLAGS=2    # poll
  LIBEV_FLAGS=4    # epoll (Linux)
  LIBEV_FLAGS=8    # kqueue (*BSD, OS X)
  LIBEV_FLAGS=64   # Linux AIO

The event loop will be resilient to time jumps if a monotonic clock is available through L<Time::HiRes>. A TLS
certificate and key are also built right in, to make writing test servers as easy as possible. Also note that for
convenience the C<PIPE> signal will be set to C<IGNORE> when L<Mojo::IOLoop> is loaded.

For better scalability (epoll, kqueue) and to provide non-blocking name resolution, SOCKS5 as well as TLS support, the
optional modules L<EV> (4.32+), L<Net::DNS::Native> (0.15+), L<IO::Socket::Socks> (0.64+) and L<IO::Socket::SSL>
(2.009+) will be used automatically if possible. Individual features can also be disabled with the C<MOJO_NO_NNR>,
C<MOJO_NO_SOCKS> and C<MOJO_NO_TLS> environment variables.

See L<Mojolicious::Guides::Cookbook/"REAL-TIME WEB"> for more.

=head1 EVENTS

L<Mojo::IOLoop> inherits all events from L<Mojo::EventEmitter> and can emit the following new ones.

=head2 finish

  $loop->on(finish => sub ($loop) {...});

Emitted when the event loop wants to shut down gracefully and is just waiting for all existing connections to be
closed.

=head2 reset

  $loop->on(reset => sub ($loop) {...});

Emitted when the event loop is reset, this usually happens after the process is forked to clean up resources that
cannot be shared.

=head1 ATTRIBUTES

L<Mojo::IOLoop> implements the following attributes.

=head2 max_accepts

  my $max = $loop->max_accepts;
  $loop   = $loop->max_accepts(1000);

The maximum number of connections this event loop is allowed to accept, before shutting down gracefully without
interrupting existing connections, defaults to C<0>. Setting the value to C<0> will allow this event loop to accept new
connections indefinitely. Note that up to half of this value can be subtracted randomly to improve load balancing
between multiple server processes, and to make sure that not all of them restart at the same time.

=head2 max_connections

  my $max = $loop->max_connections;
  $loop   = $loop->max_connections(100);

The maximum number of accepted connections this event loop is allowed to handle concurrently, before stopping to accept
new incoming connections, defaults to C<1000>.

=head2 reactor

  my $reactor = $loop->reactor;
  $loop       = $loop->reactor(Mojo::Reactor->new);

Low-level event reactor, usually a L<Mojo::Reactor::Poll> or L<Mojo::Reactor::EV> object with a default subscriber to
the event L<Mojo::Reactor/"error">.

  # Watch if handle becomes readable or writable
  Mojo::IOLoop->singleton->reactor->io($handle => sub ($reactor, $writable) {
    say $writable ? 'Handle is writable' : 'Handle is readable';
  });

  # Change to watching only if handle becomes writable
  Mojo::IOLoop->singleton->reactor->watch($handle, 0, 1);

  # Remove handle again
  Mojo::IOLoop->singleton->reactor->remove($handle);

=head1 METHODS

L<Mojo::IOLoop> inherits all methods from L<Mojo::EventEmitter> and implements the following new ones.

=head2 acceptor

  my $server = Mojo::IOLoop->acceptor($id);
  my $server = $loop->acceptor($id);
  my $id     = $loop->acceptor(Mojo::IOLoop::Server->new);

Get L<Mojo::IOLoop::Server> object for id or turn object into an acceptor.

=head2 client

  my $id = Mojo::IOLoop->client(address => '127.0.0.1', port => 3000, sub {...});
  my $id = $loop->client(address => '127.0.0.1', port => 3000, sub {...});
  my $id = $loop->client({address => '127.0.0.1', port => 3000} => sub {...});

Open a TCP/IP or UNIX domain socket connection with L<Mojo::IOLoop::Client> and create a stream object (usually
L<Mojo::IOLoop::Stream>), takes the same arguments as L<Mojo::IOLoop::Client/"connect">.

=head2 is_running

  my $bool = Mojo::IOLoop->is_running;
  my $bool = $loop->is_running;

Check if event loop is running.

=head2 next_tick

  my $undef = Mojo::IOLoop->next_tick(sub ($loop) {...});
  my $undef = $loop->next_tick(sub ($loop) {...});

Execute callback as soon as possible, but not before returning or other callbacks that have been registered with this
method, always returns C<undef>.

  # Perform operation on next reactor tick
  Mojo::IOLoop->next_tick(sub ($loop) {...});

=head2 one_tick

  Mojo::IOLoop->one_tick;
  $loop->one_tick;

Run event loop until an event occurs.

  # Don't block longer than 0.5 seconds
  my $id = Mojo::IOLoop->timer(0.5 => sub ($loop) {});
  Mojo::IOLoop->one_tick;
  Mojo::IOLoop->remove($id);

=head2 recurring

  my $id = Mojo::IOLoop->recurring(3 => sub ($loop) {...});
  my $id = $loop->recurring(0 => sub ($loop) {...});
  my $id = $loop->recurring(0.25 => sub ($loop) {...});

Create a new recurring timer, invoking the callback repeatedly after a given amount of time in seconds.

  # Perform operation every 5 seconds
  Mojo::IOLoop->recurring(5 => sub ($loop) {...});

=head2 remove

  Mojo::IOLoop->remove($id);
  $loop->remove($id);

Remove anything with an id, connections will be dropped gracefully by allowing them to finish writing all data in their
write buffers.

=head2 reset

  Mojo::IOLoop->reset;
  $loop->reset;
  $loop->reset({freeze => 1});

Remove everything and stop the event loop.

These options are currently available:

=over 2

=item freeze

  freeze => 1

Freeze the current state of the event loop in time before resetting it. This will prevent active connections from
getting closed immediately, which can help with many unintended side effects when processes are forked. Note that this
option is B<EXPERIMENTAL> and might change without warning!

=back

=head2 server

  my $id = Mojo::IOLoop->server(port => 3000, sub {...});
  my $id = $loop->server(port => 3000, sub {...});
  my $id = $loop->server({port => 3000} => sub {...});

Accept TCP/IP and UNIX domain socket connections with L<Mojo::IOLoop::Server> and create stream objects (usually
L<Mojo::IOLoop::Stream>, takes the same arguments as L<Mojo::IOLoop::Server/"listen">.

  # Listen on random port
  my $id = Mojo::IOLoop->server({address => '127.0.0.1'} => sub ($loop, $stream, $id) {...});
  my $port = Mojo::IOLoop->acceptor($id)->port;

=head2 singleton

  my $loop = Mojo::IOLoop->singleton;

The global L<Mojo::IOLoop> singleton, used to access a single shared event loop object from everywhere inside the
process.

  # Many methods also allow you to take shortcuts
  Mojo::IOLoop->timer(2 => sub { Mojo::IOLoop->stop });
  Mojo::IOLoop->start;

  # Restart active timer
  my $id = Mojo::IOLoop->timer(3 => sub { say 'Timeout!' });
  Mojo::IOLoop->singleton->reactor->again($id);

  # Turn file descriptor into handle and watch if it becomes readable
  my $handle = IO::Handle->new_from_fd($fd, 'r');
  Mojo::IOLoop->singleton->reactor->io($handle => sub ($reactor, $writable) {
    say $writable ? 'Handle is writable' : 'Handle is readable';
  })->watch($handle, 1, 0);

=head2 start

  Mojo::IOLoop->start;
  $loop->start;

Start the event loop, this will block until L</"stop"> is called. Note that some reactors stop automatically if there
are no events being watched anymore.

  # Start event loop only if it is not running already
  Mojo::IOLoop->start unless Mojo::IOLoop->is_running;

=head2 stop

  Mojo::IOLoop->stop;
  $loop->stop;

Stop the event loop, this will not interrupt any existing connections and the event loop can be restarted by running
L</"start"> again.

=head2 stop_gracefully

  Mojo::IOLoop->stop_gracefully;
  $loop->stop_gracefully;

Stop accepting new connections and wait for already accepted connections to be closed, before stopping the event loop.

=head2 stream

  my $stream = Mojo::IOLoop->stream($id);
  my $stream = $loop->stream($id);
  my $id     = $loop->stream(Mojo::IOLoop::Stream->new);

Get L<Mojo::IOLoop::Stream> object for id or turn object into a connection.

  # Increase inactivity timeout for connection to 300 seconds
  Mojo::IOLoop->stream($id)->timeout(300);

=head2 subprocess

  my $subprocess = Mojo::IOLoop->subprocess;
  my $subprocess = $loop->subprocess;
  my $subprocess = $loop->subprocess(sub ($subprocess) {...}, sub ($subprocess, $err, @results) {...});

Build L<Mojo::IOLoop::Subprocess> object to perform computationally expensive operations in subprocesses, without
blocking the event loop. Callbacks will be passed along to L<Mojo::IOLoop::Subprocess/"run">.

  # Operation that would block the event loop for 5 seconds
  Mojo::IOLoop->subprocess->run_p(sub {
    sleep 5;
    return '♥', 'Mojolicious';
  })->then(sub (@results) {
    say "I $results[0] $results[1]!";
  })->catch(sub ($err) {
    say "Subprocess error: $err";
  });

=head2 timer

  my $id = Mojo::IOLoop->timer(3 => sub ($loop) {...});
  my $id = $loop->timer(0 => sub ($loop) {...});
  my $id = $loop->timer(0.25 => sub ($loop) {...});

Create a new timer, invoking the callback after a given amount of time in seconds.

  # Perform operation in 5 seconds
  Mojo::IOLoop->timer(5 => sub ($loop) {...});

=head1 DEBUGGING

You can set the C<MOJO_IOLOOP_DEBUG> environment variable to get some advanced diagnostics information printed to
C<STDERR>.

  MOJO_IOLOOP_DEBUG=1

=head1 SEE ALSO

L<Mojolicious>, L<Mojolicious::Guides>, L<https://mojolicious.org>.

=cut