# please insert nothing before this line: -*- mode: cperl; cperl-indent-level: 4; cperl-continued-statement-offset: 4; indent-tabs-mode: nil -*-
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
package APR::Const;
use ModPerl::Const ();
use APR ();
use XSLoader ();
our $VERSION = '0.009000';
our @ISA = qw(ModPerl::Const);
XSLoader::load(__PACKAGE__, $VERSION);
1;
=head1 NAME
APR::Const - Perl Interface for APR Constants
=head1 Synopsis
# make the constants available but don't import them
use APR::Const -compile => qw(constant names ...);
# w/o the => syntax sugar
use APR::Const ("-compile", qw(constant names ...));
# compile and import the constants
use APR::Const qw(constant names ...);
=head1 Description
This package contains constants specific to C<APR> features.
Refer to C<L<the Apache2::Const description
section|docs::2.0::api::Apache2::Const/Description>> for more
information.
=head1 Constants
=head2 C<:common>
use APR::Const -compile => qw(:common);
The C<:common> group is for XXX constants.
=head3 C<APR::Const::SUCCESS>
=over
=item since: 2.0.00
=back
=head2 C<:error>
use APR::Const -compile => qw(:error);
The C<:error> group is for XXX constants.
=head3 C<APR::Const::EABOVEROOT>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::EABSOLUTE>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::EACCES>
=over
=item since: 2.0.00
=back
Due to possible variants in conditions matching C<EACCES>,
for checking error codes against this you most likely want to use the
C<L<APR::Status::is_EACCES|docs::2.0::api::APR::Status/C_is_EACCES_>>
function instead.
=head3 C<APR::Const::EAGAIN>
=over
=item since: 2.0.00
=back
The error I<Resource temporarily unavailable>, may be returned by many
different system calls, especially IO calls. Most likely you want to
use the
C<L<APR::Status::is_EAGAIN|docs::2.0::api::APR::Status/C_is_EAGAIN_>>
function instead.
=head3 C<APR::Const::EBADDATE>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::EBADF>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::EBADIP>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::EBADMASK>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::EBADPATH>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::EBUSY>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::ECONNABORTED>
=over
=item since: 2.0.00
=back
Due to possible variants in conditions matching C<ECONNABORTED>,
for checking error codes against this you most likely want to use the
C<L<APR::Status::is_ECONNABORTED|docs::2.0::api::APR::Status/C_is_ECONNABORTED_>>
function instead.
=head3 C<APR::Const::ECONNREFUSED>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::ECONNRESET>
=over
=item since: 2.0.00
=back
Due to possible variants in conditions matching C<ECONNRESET>, for
checking error codes against this you most likely want to use the
C<L<APR::Status::is_ECONNRESET|docs::2.0::api::APR::Status/C_is_ECONNRESET_>>
function instead.
=head3 C<APR::Const::EDSOOPEN>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::EEXIST>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::EFTYPE>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::EGENERAL>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::EHOSTUNREACH>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::EINCOMPLETE>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::EINIT>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::EINPROGRESS>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::EINTR>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::EINVAL>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::EINVALSOCK>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::EMFILE>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::EMISMATCH>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::ENAMETOOLONG>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::END>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::ENETUNREACH>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::ENFILE>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::ENODIR>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::ENOENT>
=over
=item since: 2.0.00
=back
Due to possible variants in conditions matching C<ENOENT>,
for checking error codes against this you most likely want to use the
C<L<APR::Status::is_ENOENT|docs::2.0::api::APR::Status/C_is_ENOENT_>>
function instead.
=head3 C<APR::Const::ENOLOCK>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::ENOMEM>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::ENOPOLL>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::ENOPOOL>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::ENOPROC>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::ENOSHMAVAIL>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::ENOSOCKET>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::ENOSPC>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::ENOSTAT>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::ENOTDIR>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::ENOTEMPTY>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::ENOTHDKEY>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::ENOTHREAD>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::ENOTIME>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::ENOTIMPL>
Something is not implemented
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::ENOTSOCK>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::EOF>
=over
=item since: 2.0.00
=back
Due to possible variants in conditions matching C<EOF>,
for checking error codes against this you most likely want to use the
C<L<APR::Status::is_EOF|docs::2.0::api::APR::Status/C_is_EOF_>>
function instead.
=head3 C<APR::Const::EPATHWILD>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::EPIPE>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::EPROC_UNKNOWN>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::ERELATIVE>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::ESPIPE>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::ESYMNOTFOUND>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::ETIMEDOUT>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::EXDEV>
=over
=item since: 2.0.00
=back
=head2 C<:fopen>
use APR::Const -compile => qw(:fopen);
The C<:fopen> group is for XXX constants.
=head3 C<APR::Const::FOPEN_BINARY>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FOPEN_BUFFERED>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FOPEN_CREATE>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FOPEN_DELONCLOSE>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FOPEN_EXCL>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FOPEN_PEND>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FOPEN_READ>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FOPEN_TRUNCATE>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FOPEN_WRITE>
=over
=item since: 2.0.00
=back
=head2 C<:filepath>
use APR::Const -compile => qw(:filepath);
The C<:filepath> group is for XXX constants.
=head3 C<APR::Const::FILEPATH_ENCODING_LOCALE>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FILEPATH_ENCODING_UNKNOWN>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FILEPATH_ENCODING_UTF8>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FILEPATH_NATIVE>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FILEPATH_NOTABOVEROOT>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FILEPATH_NOTABSOLUTE>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FILEPATH_NOTRELATIVE>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FILEPATH_SECUREROOT>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FILEPATH_SECUREROOTTEST>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FILEPATH_TRUENAME>
=over
=item since: 2.0.00
=back
=head2 C<:fprot>
use APR::Const -compile => qw(:fprot);
The C<:fprot> group is used by
C<L<$finfo-E<gt>protection|docs::2.0::api::APR::Finfo/C_protection_>>.
=head3 C<APR::Const::FPROT_GEXECUTE>
Execute by group
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FPROT_GREAD>
Read by group
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FPROT_GSETID>
Set group id
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FPROT_GWRITE>
Write by group
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FPROT_OS_DEFAULT>
use OS's default permissions
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FPROT_UEXECUTE>
Execute by user
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FPROT_UREAD>
Read by user
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FPROT_USETID>
Set user id
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FPROT_UWRITE>
Write by user
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FPROT_WEXECUTE>
Execute by others
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FPROT_WREAD>
Read by others
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FPROT_WSTICKY>
Sticky bit
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FPROT_WWRITE>
Write by others
=over
=item since: 2.0.00
=back
=head2 C<:filetype>
use APR::Const -compile => qw(:filetype);
The C<:filetype> group is used by
C<L<$finfo-E<gt>filetype|docs::2.0::api::APR::Finfo/C_filetype_>>.
=head3 C<APR::Const::FILETYPE_BLK>
a file is a block device
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FILETYPE_CHR>
a file is a character device
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FILETYPE_DIR>
a file is a directory
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FILETYPE_LNK>
a file is a symbolic link
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FILETYPE_NOFILE>
the file type is undedetermined.
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FILETYPE_PIPE>
a file is a FIFO or a pipe.
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FILETYPE_REG>
a file is a regular file.
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FILETYPE_SOCK>
a file is a [unix domain] socket.
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FILETYPE_UNKFILE>
a file is of some other unknown type or the type cannot be determined.
=over
=item since: 2.0.00
=back
=head2 C<:finfo>
use APR::Const -compile => qw(:finfo);
The C<:finfo> group is used by
C<L<stat()|docs::2.0::api::APR::Finfo/C_stat_>> and
C<L<$finfo-E<gt>valid|docs::2.0::api::APR::Finfo/C_valid_>>.
=head3 C<APR::Const::FINFO_ATIME>
Access Time
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FINFO_CSIZE>
Storage size consumed by the file
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FINFO_CTIME>
Creation Time
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FINFO_DEV>
Device
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FINFO_DIRENT>
an atomic unix apr_dir_read()
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FINFO_GPROT>
Group protection bits
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FINFO_GROUP>
Group id
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FINFO_ICASE>
whether device is case insensitive
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FINFO_IDENT>
device and inode
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FINFO_INODE>
Inode
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FINFO_LINK>
Stat the link not the file itself if it is a link
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FINFO_MIN>
type, mtime, ctime, atime, size
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FINFO_MTIME>
Modification Time
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FINFO_NAME>
name in proper case
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FINFO_NLINK>
Number of links
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FINFO_NORM>
All fields provided by an atomic unix apr_stat()
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FINFO_OWNER>
user and group
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FINFO_PROT>
all protections
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FINFO_SIZE>
Size of the file
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FINFO_TYPE>
Type
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FINFO_UPROT>
User protection bits
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FINFO_USER>
User id
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FINFO_WPROT>
World protection bits
=over
=item since: 2.0.00
=back
=head2 C<:flock>
use APR::Const -compile => qw(:flock);
The C<:flock> group is for XXX constants.
=head3 C<APR::Const::FLOCK_EXCLUSIVE>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FLOCK_NONBLOCK>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FLOCK_SHARED>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::FLOCK_TYPEMASK>
=over
=item since: 2.0.00
=back
=head2 C<:hook>
use APR::Const -compile => qw(:hook);
The C<:hook> group is for XXX constants.
=head3 C<APR::Const::HOOK_FIRST>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::HOOK_LAST>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::HOOK_MIDDLE>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::HOOK_REALLY_FIRST>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::HOOK_REALLY_LAST>
=over
=item since: 2.0.00
=back
=head2 C<:limit>
use APR::Const -compile => qw(:limit);
The C<:limit> group is for XXX constants.
=head3 C<APR::Const::LIMIT_CPU>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::LIMIT_MEM>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::LIMIT_NOFILE>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::LIMIT_NPROC>
=over
=item since: 2.0.00
=back
=head2 C<:lockmech>
use APR::Const -compile => qw(:lockmech);
The C<:lockmech> group is for XXX constants.
=head3 C<APR::Const::LOCK_DEFAULT>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::LOCK_FCNTL>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::LOCK_FLOCK>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::LOCK_POSIXSEM>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::LOCK_PROC_PTHREAD>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::LOCK_SYSVSEM>
=over
=item since: 2.0.00
=back
=head2 C<:poll>
use APR::Const -compile => qw(:poll);
The C<:poll> group is used by
C<L<poll|docs::2.0::api::APR::Socket/C_poll_>>.
=head3 C<APR::Const::POLLERR>
=over
=item since: 2.0.00
=back
Pending error
=head3 C<APR::Const::POLLHUP>
=over
=item since: 2.0.00
=back
Hangup occurred
=head3 C<APR::Const::POLLIN>
=over
=item since: 2.0.00
=back
Can read without blocking
=head3 C<APR::Const::POLLNVAL>
=over
=item since: 2.0.00
=back
Descriptior invalid
=head3 C<APR::Const::POLLOUT>
=over
=item since: 2.0.00
=back
Can write without blocking
=head3 C<APR::Const::POLLPRI>
=over
=item since: 2.0.00
=back
Priority data available
=head2 C<:read_type>
use APR::Const -compile => qw(:read_type);
The C<:read_type> group is for IO constants.
=head3 C<APR::Const::BLOCK_READ>
=over
=item since: 2.0.00
=back
the read function blocks
=head3 C<APR::Const::NONBLOCK_READ>
=over
=item since: 2.0.00
=back
the read function does not block
=head2 C<:shutdown_how>
use APR::Const -compile => qw(:shutdown_how);
The C<:shutdown_how> group is for XXX constants.
=head3 C<APR::Const::SHUTDOWN_READ>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::SHUTDOWN_READWRITE>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::SHUTDOWN_WRITE>
=over
=item since: 2.0.00
=back
=head2 C<:socket>
use APR::Const -compile => qw(:socket);
The C<:socket> group is for the
C<L<APR::Socket|docs::2.0::api::APR::Socket>> object constants, in
methods C<L<opt_get|docs::2.0::api::APR::Socket/C_opt_get_>> and
C<L<opt_set|docs::2.0::api::APR::Socket/C_opt_set_>>.
The following section discusses in detail each of the C<:socket>
constants.
=head3 C<APR::Const::SO_DEBUG>
Possible values:
XXX
=over
=item since: 2.0.00
=back
Turns on debugging information
=head3 C<APR::Const::SO_DISCONNECTED>
Queries the disconnected state of the socket. (Currently only used on
Windows)
Possible values:
XXX
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::SO_KEEPALIVE>
Keeps connections active
Possible values:
XXX
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::SO_LINGER>
Lingers on close if data is present
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::SO_NONBLOCK>
Turns blocking IO mode on/off for socket.
Possible values:
1 nonblocking
0 blocking
For example, to set a socket to a blocking IO mode:
use APR::Socket ();
use APR::Const -compile => qw(SO_NONBLOCK);
...
if ($socket->opt_get(APR::Const::SO_NONBLOCK)) {
$socket->opt_set(APR::Const::SO_NONBLOCK => 0);
}
You don't have to query for this option, before setting it. It was
done for the demonstration purpose.
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::SO_RCVBUF>
Controls the C<ReceiveBufferSize> setting
Possible values:
XXX
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::SO_REUSEADDR>
The rules used in validating addresses supplied to bind should allow
reuse of local addresses.
Possible values:
XXX
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::SO_SNDBUF>
Controls the C<SendBufferSize> setting
Possible values:
XXX
=over
=item since: 2.0.00
=back
=head2 C<:status>
use APR::Const -compile => qw(:status);
The C<:status> group is for the API that return status code, or set
the error variable XXXXXX.
The following section discusses in detail each of the available
C<:status> constants.
=head3 C<APR::Const::TIMEUP>
The operation did not finish before the timeout.
=over
=item since: 2.0.00
=back
Due to possible variants in conditions matching C<TIMEUP>,
for checking error codes against this you most likely want to use the
C<L<APR::Status::is_TIMEUP|docs::2.0::api::APR::Status/C_is_TIMEUP_>>
function instead.
=head2 C<:table>
use APR::Const -compile => qw(:table);
The C<:table> group is for C<overlap()> and C<compress()> constants.
See C<L<APR::Table|docs::2.0::api::APR::Table>> for details.
=head3 C<APR::Const::OVERLAP_TABLES_MERGE>
=over
=item since: 2.0.00
=back
See C<L<APR::Table::compress|docs::2.0::api::APR::Table/C_compress_>>
and C<L<APR::Table::overlap|docs::2.0::api::APR::Table/C_overlap_>>.
=head3 C<APR::Const::OVERLAP_TABLES_SET>
=over
=item since: 2.0.00
=back
See C<L<APR::Table::compress|docs::2.0::api::APR::Table/C_compress_>>
and C<L<APR::Table::overlap|docs::2.0::api::APR::Table/C_overlap_>>.
=head2 C<:uri>
use APR::Const -compile => qw(:uri);
The C<:uri> group of constants is for manipulating URIs.
=head3 C<APR::Const::URI_ACAP_DEFAULT_PORT>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::URI_FTP_DEFAULT_PORT>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::URI_GOPHER_DEFAULT_PORT>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::URI_HTTPS_DEFAULT_PORT>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::URI_HTTP_DEFAULT_PORT>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::URI_IMAP_DEFAULT_PORT>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::URI_LDAP_DEFAULT_PORT>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::URI_NFS_DEFAULT_PORT>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::URI_NNTP_DEFAULT_PORT>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::URI_POP_DEFAULT_PORT>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::URI_PROSPERO_DEFAULT_PORT>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::URI_RTSP_DEFAULT_PORT>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::URI_SIP_DEFAULT_PORT>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::URI_SNEWS_DEFAULT_PORT>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::URI_SSH_DEFAULT_PORT>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::URI_TELNET_DEFAULT_PORT>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::URI_TIP_DEFAULT_PORT>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::URI_UNP_OMITPASSWORD>
=over
=item since: 2.0.00
=back
See C<L<APR::URI::unparse|docs::2.0::api::APR::URI/C_unparse_>>.
=head3 C<APR::Const::URI_UNP_OMITPATHINFO>
=over
=item since: 2.0.00
=back
See C<L<APR::URI::unparse|docs::2.0::api::APR::URI/C_unparse_>>.
=head3 C<APR::Const::URI_UNP_OMITQUERY>
=over
=item since: 2.0.00
=back
See C<L<APR::URI::unparse|docs::2.0::api::APR::URI/C_unparse_>>.
=head3 C<APR::Const::URI_UNP_OMITSITEPART>
=over
=item since: 2.0.00
=back
See C<L<APR::URI::unparse|docs::2.0::api::APR::URI/C_unparse_>>.
=head3 C<APR::Const::URI_UNP_OMITUSER>
=over
=item since: 2.0.00
=back
See C<L<APR::URI::unparse|docs::2.0::api::APR::URI/C_unparse_>>.
=head3 C<APR::Const::URI_UNP_OMITUSERINFO>
=over
=item since: 2.0.00
=back
=head3 C<APR::Const::URI_UNP_REVEALPASSWORD>
=over
=item since: 2.0.00
=back
See C<L<APR::URI::unparse|docs::2.0::api::APR::URI/C_unparse_>>.
=head3 C<APR::Const::URI_WAIS_DEFAULT_PORT>
=over
=item since: 2.0.00
=back
=head2 Other Constants
=head3 C<APR::PerlIO::PERLIO_LAYERS_ARE_ENABLED>
=over
=item since: 2.0.00
=back
See C<L<APR::PerlIO::Constants|docs::2.0::api::APR::PerlIO/Constants>>)
=head1 See Also
L<mod_perl 2.0 documentation|docs::2.0::index>.
=head1 Copyright
mod_perl 2.0 and its core modules are copyrighted under
The Apache Software License, Version 2.0.
=head1 Authors
L<The mod_perl development team and numerous
contributors|about::contributors::people>.
=cut