NAME
IO::AIO - Asynchronous/Advanced Input/Output
SYNOPSIS
use IO::AIO;
aio_open "/etc/passwd", IO::AIO::O_RDONLY, 0, sub {
my $fh = shift
or die "/etc/passwd: $!";
...
};
aio_unlink "/tmp/file", sub { };
aio_read $fh, 30000, 1024, $buffer, 0, sub {
$_[0] > 0 or die "read error: $!";
};
# version 2+ has request and group objects
use IO::AIO 2;
aioreq_pri 4; # give next request a very high priority
my $req = aio_unlink "/tmp/file", sub { };
$req->cancel; # cancel request if still in queue
my $grp = aio_group sub { print "all stats done\n" };
add $grp aio_stat "..." for ...;
DESCRIPTION
This module implements asynchronous I/O using whatever means your
operating system supports. It is implemented as an interface to "libeio"
(<http://software.schmorp.de/pkg/libeio.html>).
Asynchronous means that operations that can normally block your program
(e.g. reading from disk) will be done asynchronously: the operation will
still block, but you can do something else in the meantime. This is
extremely useful for programs that need to stay interactive even when
doing heavy I/O (GUI programs, high performance network servers etc.),
but can also be used to easily do operations in parallel that are
normally done sequentially, e.g. stat'ing many files, which is much
faster on a RAID volume or over NFS when you do a number of stat
operations concurrently.
While most of this works on all types of file descriptors (for example
sockets), using these functions on file descriptors that support
nonblocking operation (again, sockets, pipes etc.) is very inefficient.
Use an event loop for that (such as the EV module): IO::AIO will
naturally fit into such an event loop itself.
In this version, a number of threads are started that execute your
requests and signal their completion. You don't need thread support in
perl, and the threads created by this module will not be visible to
perl. In the future, this module might make use of the native aio
functions available on many operating systems. However, they are often
not well-supported or restricted (GNU/Linux doesn't allow them on normal
files currently, for example), and they would only support aio_read and
aio_write, so the remaining functionality would have to be implemented
using threads anyway.
In addition to asynchronous I/O, this module also exports some rather
arcane interfaces, such as "madvise" or linux's "splice" system call,
which is why the "A" in "AIO" can also mean *advanced*.
Although the module will work in the presence of other (Perl-) threads,
it is currently not reentrant in any way, so use appropriate locking
yourself, always call "poll_cb" from within the same thread, or never
call "poll_cb" (or other "aio_" functions) recursively.
EXAMPLE
This is a simple example that uses the EV module and loads /etc/passwd
asynchronously:
use EV;
use IO::AIO;
# register the IO::AIO callback with EV
my $aio_w = EV::io IO::AIO::poll_fileno, EV::READ, \&IO::AIO::poll_cb;
# queue the request to open /etc/passwd
aio_open "/etc/passwd", IO::AIO::O_RDONLY, 0, sub {
my $fh = shift
or die "error while opening: $!";
# stat'ing filehandles is generally non-blocking
my $size = -s $fh;
# queue a request to read the file
my $contents;
aio_read $fh, 0, $size, $contents, 0, sub {
$_[0] == $size
or die "short read: $!";
close $fh;
# file contents now in $contents
print $contents;
# exit event loop and program
EV::break;
};
};
# possibly queue up other requests, or open GUI windows,
# check for sockets etc. etc.
# process events as long as there are some:
EV::run;
REQUEST ANATOMY AND LIFETIME
Every "aio_*" function creates a request. which is a C data structure
not directly visible to Perl.
If called in non-void context, every request function returns a Perl
object representing the request. In void context, nothing is returned,
which saves a bit of memory.
The perl object is a fairly standard ref-to-hash object. The hash
contents are not used by IO::AIO so you are free to store anything you
like in it.
During their existance, aio requests travel through the following
states, in order:
ready
Immediately after a request is created it is put into the ready
state, waiting for a thread to execute it.
execute
A thread has accepted the request for processing and is currently
executing it (e.g. blocking in read).
pending
The request has been executed and is waiting for result processing.
While request submission and execution is fully asynchronous, result
processing is not and relies on the perl interpreter calling
"poll_cb" (or another function with the same effect).
result
The request results are processed synchronously by "poll_cb".
The "poll_cb" function will process all outstanding aio requests by
calling their callbacks, freeing memory associated with them and
managing any groups they are contained in.
done
Request has reached the end of its lifetime and holds no resources
anymore (except possibly for the Perl object, but its connection to
the actual aio request is severed and calling its methods will
either do nothing or result in a runtime error).
FUNCTIONS
QUICK OVERVIEW
This section simply lists the prototypes most of the functions for quick
reference. See the following sections for function-by-function
documentation.
aio_wd $pathname, $callback->($wd)
aio_open $pathname, $flags, $mode, $callback->($fh)
aio_close $fh, $callback->($status)
aio_seek $fh,$offset,$whence, $callback->($offs)
aio_read $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
aio_write $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
aio_sendfile $out_fh, $in_fh, $in_offset, $length, $callback->($retval)
aio_readahead $fh,$offset,$length, $callback->($retval)
aio_stat $fh_or_path, $callback->($status)
aio_lstat $fh, $callback->($status)
aio_statvfs $fh_or_path, $callback->($statvfs)
aio_utime $fh_or_path, $atime, $mtime, $callback->($status)
aio_chown $fh_or_path, $uid, $gid, $callback->($status)
aio_chmod $fh_or_path, $mode, $callback->($status)
aio_truncate $fh_or_path, $offset, $callback->($status)
aio_allocate $fh, $mode, $offset, $len, $callback->($status)
aio_fiemap $fh, $start, $length, $flags, $count, $cb->(\@extents)
aio_unlink $pathname, $callback->($status)
aio_mknod $pathname, $mode, $dev, $callback->($status)
aio_link $srcpath, $dstpath, $callback->($status)
aio_symlink $srcpath, $dstpath, $callback->($status)
aio_readlink $pathname, $callback->($link)
aio_realpath $pathname, $callback->($path)
aio_rename $srcpath, $dstpath, $callback->($status)
aio_rename2 $srcpath, $dstpath, $flags, $callback->($status)
aio_mkdir $pathname, $mode, $callback->($status)
aio_rmdir $pathname, $callback->($status)
aio_readdir $pathname, $callback->($entries)
aio_readdirx $pathname, $flags, $callback->($entries, $flags)
IO::AIO::READDIR_DENTS IO::AIO::READDIR_DIRS_FIRST
IO::AIO::READDIR_STAT_ORDER IO::AIO::READDIR_FOUND_UNKNOWN
aio_scandir $pathname, $maxreq, $callback->($dirs, $nondirs)
aio_load $pathname, $data, $callback->($status)
aio_copy $srcpath, $dstpath, $callback->($status)
aio_move $srcpath, $dstpath, $callback->($status)
aio_rmtree $pathname, $callback->($status)
aio_fcntl $fh, $cmd, $arg, $callback->($status)
aio_ioctl $fh, $request, $buf, $callback->($status)
aio_sync $callback->($status)
aio_syncfs $fh, $callback->($status)
aio_fsync $fh, $callback->($status)
aio_fdatasync $fh, $callback->($status)
aio_sync_file_range $fh, $offset, $nbytes, $flags, $callback->($status)
aio_pathsync $pathname, $callback->($status)
aio_msync $scalar, $offset = 0, $length = undef, flags = MS_SYNC, $callback->($status)
aio_mtouch $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status)
aio_mlock $scalar, $offset = 0, $length = undef, $callback->($status)
aio_mlockall $flags, $callback->($status)
aio_group $callback->(...)
aio_nop $callback->()
$prev_pri = aioreq_pri [$pri]
aioreq_nice $pri_adjust
IO::AIO::poll_wait
IO::AIO::poll_cb
IO::AIO::poll
IO::AIO::flush
IO::AIO::max_poll_reqs $nreqs
IO::AIO::max_poll_time $seconds
IO::AIO::min_parallel $nthreads
IO::AIO::max_parallel $nthreads
IO::AIO::max_idle $nthreads
IO::AIO::idle_timeout $seconds
IO::AIO::max_outstanding $maxreqs
IO::AIO::nreqs
IO::AIO::nready
IO::AIO::npending
IO::AIO::reinit
$nfd = IO::AIO::get_fdlimit [EXPERIMENTAL]
IO::AIO::min_fdlimit $nfd [EXPERIMENTAL]
IO::AIO::sendfile $ofh, $ifh, $offset, $count
IO::AIO::fadvise $fh, $offset, $len, $advice
IO::AIO::mmap $scalar, $length, $prot, $flags[, $fh[, $offset]]
IO::AIO::munmap $scalar
IO::AIO::mremap $scalar, $new_length, $flags[, $new_address]
IO::AIO::madvise $scalar, $offset, $length, $advice
IO::AIO::mprotect $scalar, $offset, $length, $protect
IO::AIO::munlock $scalar, $offset = 0, $length = undef
IO::AIO::munlockall
# stat extensions
$counter = IO::AIO::st_gen
$seconds = IO::AIO::st_atime, IO::AIO::st_mtime, IO::AIO::st_ctime, IO::AIO::st_btime
($atime, $mtime, $ctime, $btime, ...) = IO::AIO::st_xtime
$nanoseconds = IO::AIO::st_atimensec, IO::AIO::st_mtimensec, IO::AIO::st_ctimensec, IO::AIO::st_btimensec
$seconds = IO::AIO::st_btimesec
($atime, $mtime, $ctime, $btime, ...) = IO::AIO::st_xtimensec
# very much unportable syscalls
IO::AIO::splice $r_fh, $r_off, $w_fh, $w_off, $length, $flags
IO::AIO::tee $r_fh, $w_fh, $length, $flags
$actual_size = IO::AIO::pipesize $r_fh[, $new_size]
($rfh, $wfh) = IO::AIO::pipe2 [$flags]
$fh = IO::AIO::memfd_create $pathname[, $flags]
$fh = IO::AIO::eventfd [$initval, [$flags]]
$fh = IO::AIO::timerfd_create $clockid[, $flags]
($cur_interval, $cur_value) = IO::AIO::timerfd_settime $fh, $flags, $new_interval, $nbw_value
($cur_interval, $cur_value) = IO::AIO::timerfd_gettime $fh
API NOTES
All the "aio_*" calls are more or less thin wrappers around the syscall
with the same name (sans "aio_"). The arguments are similar or
identical, and they all accept an additional (and optional) $callback
argument which must be a code reference. This code reference will be
called after the syscall has been executed in an asynchronous fashion.
The results of the request will be passed as arguments to the callback
(and, if an error occured, in $!) - for most requests the syscall return
code (e.g. most syscalls return -1 on error, unlike perl, which usually
delivers "false").
Some requests (such as "aio_readdir") pass the actual results and
communicate failures by passing "undef".
All functions expecting a filehandle keep a copy of the filehandle
internally until the request has finished.
All functions return request objects of type IO::AIO::REQ that allow
further manipulation of those requests while they are in-flight.
The pathnames you pass to these routines *should* be absolute. The
reason for this is that at the time the request is being executed, the
current working directory could have changed. Alternatively, you can
make sure that you never change the current working directory anywhere
in the program and then use relative paths. You can also take advantage
of IO::AIOs working directory abstraction, that lets you specify paths
relative to some previously-opened "working directory object" - see the
description of the "IO::AIO::WD" class later in this document.
To encode pathnames as octets, either make sure you either: a) always
pass in filenames you got from outside (command line, readdir etc.)
without tinkering, b) are in your native filesystem encoding, c) use the
Encode module and encode your pathnames to the locale (or other)
encoding in effect in the user environment, d) use
Glib::filename_from_unicode on unicode filenames or e) use something
else to ensure your scalar has the correct contents.
This works, btw. independent of the internal UTF-8 bit, which IO::AIO
handles correctly whether it is set or not.
AIO REQUEST FUNCTIONS
$prev_pri = aioreq_pri [$pri]
Returns the priority value that would be used for the next request
and, if $pri is given, sets the priority for the next aio request.
The default priority is 0, the minimum and maximum priorities are -4
and 4, respectively. Requests with higher priority will be serviced
first.
The priority will be reset to 0 after each call to one of the
"aio_*" functions.
Example: open a file with low priority, then read something from it
with higher priority so the read request is serviced before other
low priority open requests (potentially spamming the cache):
aioreq_pri -3;
aio_open ..., sub {
return unless $_[0];
aioreq_pri -2;
aio_read $_[0], ..., sub {
...
};
};
aioreq_nice $pri_adjust
Similar to "aioreq_pri", but subtracts the given value from the
current priority, so the effect is cumulative.
aio_open $pathname, $flags, $mode, $callback->($fh)
Asynchronously open or create a file and call the callback with a
newly created filehandle for the file (or "undef" in case of an
error).
The pathname passed to "aio_open" must be absolute. See API NOTES,
above, for an explanation.
The $flags argument is a bitmask. See the "Fcntl" module for a list.
They are the same as used by "sysopen".
Likewise, $mode specifies the mode of the newly created file, if it
didn't exist and "O_CREAT" has been given, just like perl's
"sysopen", except that it is mandatory (i.e. use 0 if you don't
create new files, and 0666 or 0777 if you do). Note that the $mode
will be modified by the umask in effect then the request is being
executed, so better never change the umask.
Example:
aio_open "/etc/passwd", IO::AIO::O_RDONLY, 0, sub {
if ($_[0]) {
print "open successful, fh is $_[0]\n";
...
} else {
die "open failed: $!\n";
}
};
In addition to all the common open modes/flags ("O_RDONLY",
"O_WRONLY", "O_RDWR", "O_CREAT", "O_TRUNC", "O_EXCL" and
"O_APPEND"), the following POSIX and non-POSIX constants are
available (missing ones on your system are, as usual, 0):
"O_ASYNC", "O_DIRECT", "O_NOATIME", "O_CLOEXEC", "O_NOCTTY",
"O_NOFOLLOW", "O_NONBLOCK", "O_EXEC", "O_SEARCH", "O_DIRECTORY",
"O_DSYNC", "O_RSYNC", "O_SYNC", "O_PATH", "O_TMPFILE", "O_TTY_INIT"
and "O_ACCMODE".
aio_close $fh, $callback->($status)
Asynchronously close a file and call the callback with the result
code.
Unfortunately, you can't do this to perl. Perl *insists* very
strongly on closing the file descriptor associated with the
filehandle itself.
Therefore, "aio_close" will not close the filehandle - instead it
will use dup2 to overwrite the file descriptor with the write-end of
a pipe (the pipe fd will be created on demand and will be cached).
Or in other words: the file descriptor will be closed, but it will
not be free for reuse until the perl filehandle is closed.
aio_seek $fh, $offset, $whence, $callback->($offs)
Seeks the filehandle to the new $offset, similarly to perl's
"sysseek". The $whence can use the traditional values (0 for
"IO::AIO::SEEK_SET", 1 for "IO::AIO::SEEK_CUR" or 2 for
"IO::AIO::SEEK_END").
The resulting absolute offset will be passed to the callback, or -1
in case of an error.
In theory, the $whence constants could be different than the
corresponding values from Fcntl, but perl guarantees they are the
same, so don't panic.
As a GNU/Linux (and maybe Solaris) extension, also the constants
"IO::AIO::SEEK_DATA" and "IO::AIO::SEEK_HOLE" are available, if they
could be found. No guarantees about suitability for use in
"aio_seek" or Perl's "sysseek" can be made though, although I would
naively assume they "just work".
aio_read $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
aio_write $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
Reads or writes $length bytes from or to the specified $fh and
$offset into the scalar given by $data and offset $dataoffset and
calls the callback with the actual number of bytes transferred (or
-1 on error, just like the syscall).
"aio_read" will, like "sysread", shrink or grow the $data scalar to
offset plus the actual number of bytes read.
If $offset is undefined, then the current file descriptor offset
will be used (and updated), otherwise the file descriptor offset
will not be changed by these calls.
If $length is undefined in "aio_write", use the remaining length of
$data.
If $dataoffset is less than zero, it will be counted from the end of
$data.
The $data scalar *MUST NOT* be modified in any way while the request
is outstanding. Modifying it can result in segfaults or World War
III (if the necessary/optional hardware is installed).
Example: Read 15 bytes at offset 7 into scalar $buffer, starting at
offset 0 within the scalar:
aio_read $fh, 7, 15, $buffer, 0, sub {
$_[0] > 0 or die "read error: $!";
print "read $_[0] bytes: <$buffer>\n";
};
aio_sendfile $out_fh, $in_fh, $in_offset, $length, $callback->($retval)
Tries to copy $length bytes from $in_fh to $out_fh. It starts
reading at byte offset $in_offset, and starts writing at the current
file offset of $out_fh. Because of that, it is not safe to issue
more than one "aio_sendfile" per $out_fh, as they will interfere
with each other. The same $in_fh works fine though, as this function
does not move or use the file offset of $in_fh.
Please note that "aio_sendfile" can read more bytes from $in_fh than
are written, and there is no way to find out how many more bytes
have been read from "aio_sendfile" alone, as "aio_sendfile" only
provides the number of bytes written to $out_fh. Only if the result
value equals $length one can assume that $length bytes have been
read.
Unlike with other "aio_" functions, it makes a lot of sense to use
"aio_sendfile" on non-blocking sockets, as long as one end
(typically the $in_fh) is a file - the file I/O will then be
asynchronous, while the socket I/O will be non-blocking. Note,
however, that you can run into a trap where "aio_sendfile" reads
some data with readahead, then fails to write all data, and when the
socket is ready the next time, the data in the cache is already
lost, forcing "aio_sendfile" to again hit the disk. Explicit
"aio_read" + "aio_write" let's you better control resource usage.
This call tries to make use of a native "sendfile"-like syscall to
provide zero-copy operation. For this to work, $out_fh should refer
to a socket, and $in_fh should refer to an mmap'able file.
If a native sendfile cannot be found or it fails with "ENOSYS",
"EINVAL", "ENOTSUP", "EOPNOTSUPP", "EAFNOSUPPORT", "EPROTOTYPE" or
"ENOTSOCK", it will be emulated, so you can call "aio_sendfile" on
any type of filehandle regardless of the limitations of the
operating system.
As native sendfile syscalls (as practically any non-POSIX interface
hacked together in a hurry to improve benchmark numbers) tend to be
rather buggy on many systems, this implementation tries to work
around some known bugs in Linux and FreeBSD kernels (probably
others, too), but that might fail, so you really really should check
the return value of "aio_sendfile" - fewer bytes than expected might
have been transferred.
aio_readahead $fh,$offset,$length, $callback->($retval)
"aio_readahead" populates the page cache with data from a file so
that subsequent reads from that file will not block on disk I/O. The
$offset argument specifies the starting point from which data is to
be read and $length specifies the number of bytes to be read. I/O is
performed in whole pages, so that offset is effectively rounded down
to a page boundary and bytes are read up to the next page boundary
greater than or equal to (off-set+length). "aio_readahead" does not
read beyond the end of the file. The current file offset of the file
is left unchanged.
If that syscall doesn't exist (likely if your kernel isn't Linux) it
will be emulated by simply reading the data, which would have a
similar effect.
aio_stat $fh_or_path, $callback->($status)
aio_lstat $fh, $callback->($status)
Works almost exactly like perl's "stat" or "lstat" in void context.
The callback will be called after the stat and the results will be
available using "stat _" or "-s _" and other tests (with the
exception of "-B" and "-T").
The pathname passed to "aio_stat" must be absolute. See API NOTES,
above, for an explanation.
Currently, the stats are always 64-bit-stats, i.e. instead of
returning an error when stat'ing a large file, the results will be
silently truncated unless perl itself is compiled with large file
support.
To help interpret the mode and dev/rdev stat values, IO::AIO offers
the following constants and functions (if not implemented, the
constants will be 0 and the functions will either "croak" or fall
back on traditional behaviour).
"S_IFMT", "S_IFIFO", "S_IFCHR", "S_IFBLK", "S_IFLNK", "S_IFREG",
"S_IFDIR", "S_IFWHT", "S_IFSOCK", "IO::AIO::major $dev_t",
"IO::AIO::minor $dev_t", "IO::AIO::makedev $major, $minor".
To access higher resolution stat timestamps, see "SUBSECOND STAT
TIME ACCESS".
Example: Print the length of /etc/passwd:
aio_stat "/etc/passwd", sub {
$_[0] and die "stat failed: $!";
print "size is ", -s _, "\n";
};
aio_statvfs $fh_or_path, $callback->($statvfs)
Works like the POSIX "statvfs" or "fstatvfs" syscalls, depending on
whether a file handle or path was passed.
On success, the callback is passed a hash reference with the
following members: "bsize", "frsize", "blocks", "bfree", "bavail",
"files", "ffree", "favail", "fsid", "flag" and "namemax". On
failure, "undef" is passed.
The following POSIX IO::AIO::ST_* constants are defined: "ST_RDONLY"
and "ST_NOSUID".
The following non-POSIX IO::AIO::ST_* flag masks are defined to
their correct value when available, or to 0 on systems that do not
support them: "ST_NODEV", "ST_NOEXEC", "ST_SYNCHRONOUS",
"ST_MANDLOCK", "ST_WRITE", "ST_APPEND", "ST_IMMUTABLE",
"ST_NOATIME", "ST_NODIRATIME" and "ST_RELATIME".
Example: stat "/wd" and dump out the data if successful.
aio_statvfs "/wd", sub {
my $f = $_[0]
or die "statvfs: $!";
use Data::Dumper;
say Dumper $f;
};
# result:
{
bsize => 1024,
bfree => 4333064312,
blocks => 10253828096,
files => 2050765568,
flag => 4096,
favail => 2042092649,
bavail => 4333064312,
ffree => 2042092649,
namemax => 255,
frsize => 1024,
fsid => 1810
}
aio_utime $fh_or_path, $atime, $mtime, $callback->($status)
Works like perl's "utime" function (including the special case of
$atime and $mtime being undef). Fractional times are supported if
the underlying syscalls support them.
When called with a pathname, uses utimensat(2) or utimes(2) if
available, otherwise utime(2). If called on a file descriptor, uses
futimens(2) or futimes(2) if available, otherwise returns ENOSYS, so
this is not portable.
Examples:
# set atime and mtime to current time (basically touch(1)):
aio_utime "path", undef, undef;
# set atime to current time and mtime to beginning of the epoch:
aio_utime "path", time, undef; # undef==0
aio_chown $fh_or_path, $uid, $gid, $callback->($status)
Works like perl's "chown" function, except that "undef" for either
$uid or $gid is being interpreted as "do not change" (but -1 can
also be used).
Examples:
# same as "chown root path" in the shell:
aio_chown "path", 0, -1;
# same as above:
aio_chown "path", 0, undef;
aio_truncate $fh_or_path, $offset, $callback->($status)
Works like truncate(2) or ftruncate(2).
aio_allocate $fh, $mode, $offset, $len, $callback->($status)
Allocates or frees disk space according to the $mode argument. See
the linux "fallocate" documentation for details.
$mode is usually 0 or "IO::AIO::FALLOC_FL_KEEP_SIZE" to allocate
space, or "IO::AIO::FALLOC_FL_PUNCH_HOLE |
IO::AIO::FALLOC_FL_KEEP_SIZE", to deallocate a file range.
IO::AIO also supports "FALLOC_FL_COLLAPSE_RANGE", to remove a range
(without leaving a hole), "FALLOC_FL_ZERO_RANGE", to zero a range,
"FALLOC_FL_INSERT_RANGE" to insert a range and
"FALLOC_FL_UNSHARE_RANGE" to unshare shared blocks (see your
fallocate(2) manpage).
The file system block size used by "fallocate" is presumably the
"f_bsize" returned by "statvfs", but different filesystems and
filetypes can dictate other limitations.
If "fallocate" isn't available or cannot be emulated (currently no
emulation will be attempted), passes -1 and sets $! to "ENOSYS".
aio_chmod $fh_or_path, $mode, $callback->($status)
Works like perl's "chmod" function.
aio_unlink $pathname, $callback->($status)
Asynchronously unlink (delete) a file and call the callback with the
result code.
aio_mknod $pathname, $mode, $dev, $callback->($status)
[EXPERIMENTAL]
Asynchronously create a device node (or fifo). See mknod(2).
The only (POSIX-) portable way of calling this function is:
aio_mknod $pathname, IO::AIO::S_IFIFO | $mode, 0, sub { ...
See "aio_stat" for info about some potentially helpful extra
constants and functions.
aio_link $srcpath, $dstpath, $callback->($status)
Asynchronously create a new link to the existing object at $srcpath
at the path $dstpath and call the callback with the result code.
aio_symlink $srcpath, $dstpath, $callback->($status)
Asynchronously create a new symbolic link to the existing object at
$srcpath at the path $dstpath and call the callback with the result
code.
aio_readlink $pathname, $callback->($link)
Asynchronously read the symlink specified by $path and pass it to
the callback. If an error occurs, nothing or undef gets passed to
the callback.
aio_realpath $pathname, $callback->($path)
Asynchronously make the path absolute and resolve any symlinks in
$path. The resulting path only consists of directories (same as
Cwd::realpath).
This request can be used to get the absolute path of the current
working directory by passing it a path of . (a single dot).
aio_rename $srcpath, $dstpath, $callback->($status)
Asynchronously rename the object at $srcpath to $dstpath, just as
rename(2) and call the callback with the result code.
On systems that support the AIO::WD working directory abstraction
natively, the case "[$wd, "."]" as $srcpath is specialcased -
instead of failing, "rename" is called on the absolute path of $wd.
aio_rename2 $srcpath, $dstpath, $flags, $callback->($status)
Basically a version of "aio_rename" with an additional $flags
argument. Calling this with "$flags=0" is the same as calling
"aio_rename".
Non-zero flags are currently only supported on GNU/Linux systems
that support renameat2. Other systems fail with "ENOSYS" in this
case.
The following constants are available (missing ones are, as usual
0), see renameat2(2) for details:
"IO::AIO::RENAME_NOREPLACE", "IO::AIO::RENAME_EXCHANGE" and
"IO::AIO::RENAME_WHITEOUT".
aio_mkdir $pathname, $mode, $callback->($status)
Asynchronously mkdir (create) a directory and call the callback with
the result code. $mode will be modified by the umask at the time the
request is executed, so do not change your umask.
aio_rmdir $pathname, $callback->($status)
Asynchronously rmdir (delete) a directory and call the callback with
the result code.
On systems that support the AIO::WD working directory abstraction
natively, the case "[$wd, "."]" is specialcased - instead of
failing, "rmdir" is called on the absolute path of $wd.
aio_readdir $pathname, $callback->($entries)
Unlike the POSIX call of the same name, "aio_readdir" reads an
entire directory (i.e. opendir + readdir + closedir). The entries
will not be sorted, and will NOT include the "." and ".." entries.
The callback is passed a single argument which is either "undef" or
an array-ref with the filenames.
aio_readdirx $pathname, $flags, $callback->($entries, $flags)
Quite similar to "aio_readdir", but the $flags argument allows one
to tune behaviour and output format. In case of an error, $entries
will be "undef".
The flags are a combination of the following constants, ORed
together (the flags will also be passed to the callback, possibly
modified):
IO::AIO::READDIR_DENTS
Normally the callback gets an arrayref consisting of names only
(as with "aio_readdir"). If this flag is set, then the callback
gets an arrayref with "[$name, $type, $inode]" arrayrefs, each
describing a single directory entry in more detail:
$name is the name of the entry.
$type is one of the "IO::AIO::DT_xxx" constants:
"IO::AIO::DT_UNKNOWN", "IO::AIO::DT_FIFO", "IO::AIO::DT_CHR",
"IO::AIO::DT_DIR", "IO::AIO::DT_BLK", "IO::AIO::DT_REG",
"IO::AIO::DT_LNK", "IO::AIO::DT_SOCK", "IO::AIO::DT_WHT".
"IO::AIO::DT_UNKNOWN" means just that: readdir does not know. If
you need to know, you have to run stat yourself. Also, for
speed/memory reasons, the $type scalars are read-only: you must
not modify them.
$inode is the inode number (which might not be exact on systems
with 64 bit inode numbers and 32 bit perls). This field has
unspecified content on systems that do not deliver the inode
information.
IO::AIO::READDIR_DIRS_FIRST
When this flag is set, then the names will be returned in an
order where likely directories come first, in optimal stat
order. This is useful when you need to quickly find directories,
or you want to find all directories while avoiding to stat()
each entry.
If the system returns type information in readdir, then this is
used to find directories directly. Otherwise, likely directories
are names beginning with ".", or otherwise names with no dots,
of which names with short names are tried first.
IO::AIO::READDIR_STAT_ORDER
When this flag is set, then the names will be returned in an
order suitable for stat()'ing each one. That is, when you plan
to stat() most or all files in the given directory, then the
returned order will likely be faster.
If both this flag and "IO::AIO::READDIR_DIRS_FIRST" are
specified, then the likely dirs come first, resulting in a less
optimal stat order for stat'ing all entries, but likely a more
optimal order for finding subdirectories.
IO::AIO::READDIR_FOUND_UNKNOWN
This flag should not be set when calling "aio_readdirx".
Instead, it is being set by "aio_readdirx", when any of the
$type's found were "IO::AIO::DT_UNKNOWN". The absence of this
flag therefore indicates that all $type's are known, which can
be used to speed up some algorithms.
aio_slurp $pathname, $offset, $length, $data, $callback->($status)
Opens, reads and closes the given file. The data is put into $data,
which is resized as required.
If $offset is negative, then it is counted from the end of the file.
If $length is zero, then the remaining length of the file is used.
Also, in this case, the same limitations to modifying $data apply as
when IO::AIO::mmap is used, i.e. it must only be modified in-place
with "substr". If the size of the file is known, specifying a
non-zero $length results in a performance advantage.
This request is similar to the older "aio_load" request, but since
it is a single request, it might be more efficient to use.
Example: load /etc/passwd into $passwd.
my $passwd;
aio_slurp "/etc/passwd", 0, 0, $passwd, sub {
$_[0] >= 0
or die "/etc/passwd: $!\n";
printf "/etc/passwd is %d bytes long, and contains:\n", length $passwd;
print $passwd;
};
IO::AIO::flush;
aio_load $pathname, $data, $callback->($status)
This is a composite request that tries to fully load the given file
into memory. Status is the same as with aio_read.
Using "aio_slurp" might be more efficient, as it is a single
request.
aio_copy $srcpath, $dstpath, $callback->($status)
Try to copy the *file* (directories not supported as either source
or destination) from $srcpath to $dstpath and call the callback with
a status of 0 (ok) or -1 (error, see $!).
Existing destination files will be truncated.
This is a composite request that creates the destination file with
mode 0200 and copies the contents of the source file into it using
"aio_sendfile", followed by restoring atime, mtime, access mode and
uid/gid, in that order.
If an error occurs, the partial destination file will be unlinked,
if possible, except when setting atime, mtime, access mode and
uid/gid, where errors are being ignored.
aio_move $srcpath, $dstpath, $callback->($status)
Try to move the *file* (directories not supported as either source
or destination) from $srcpath to $dstpath and call the callback with
a status of 0 (ok) or -1 (error, see $!).
This is a composite request that tries to rename(2) the file first;
if rename fails with "EXDEV", it copies the file with "aio_copy"
and, if that is successful, unlinks the $srcpath.
aio_scandir $pathname, $maxreq, $callback->($dirs, $nondirs)
Scans a directory (similar to "aio_readdir") but additionally tries
to efficiently separate the entries of directory $path into two sets
of names, directories you can recurse into (directories), and ones
you cannot recurse into (everything else, including symlinks to
directories).
"aio_scandir" is a composite request that generates many sub
requests. $maxreq specifies the maximum number of outstanding aio
requests that this function generates. If it is "<= 0", then a
suitable default will be chosen (currently 4).
On error, the callback is called without arguments, otherwise it
receives two array-refs with path-relative entry names.
Example:
aio_scandir $dir, 0, sub {
my ($dirs, $nondirs) = @_;
print "real directories: @$dirs\n";
print "everything else: @$nondirs\n";
};
Implementation notes.
The "aio_readdir" cannot be avoided, but "stat()"'ing every entry
can.
If readdir returns file type information, then this is used directly
to find directories.
Otherwise, after reading the directory, the modification time, size
etc. of the directory before and after the readdir is checked, and
if they match (and isn't the current time), the link count will be
used to decide how many entries are directories (if >= 2).
Otherwise, no knowledge of the number of subdirectories will be
assumed.
Then entries will be sorted into likely directories a non-initial
dot currently) and likely non-directories (see "aio_readdirx"). Then
every entry plus an appended "/." will be "stat"'ed, likely
directories first, in order of their inode numbers. If that
succeeds, it assumes that the entry is a directory or a symlink to
directory (which will be checked separately). This is often faster
than stat'ing the entry itself because filesystems might detect the
type of the entry without reading the inode data (e.g. ext2fs
filetype feature), even on systems that cannot return the filetype
information on readdir.
If the known number of directories (link count - 2) has been
reached, the rest of the entries is assumed to be non-directories.
This only works with certainty on POSIX (= UNIX) filesystems, which
fortunately are the vast majority of filesystems around.
It will also likely work on non-POSIX filesystems with reduced
efficiency as those tend to return 0 or 1 as link counts, which
disables the directory counting heuristic.
aio_rmtree $pathname, $callback->($status)
Delete a directory tree starting (and including) $path, return the
status of the final "rmdir" only. This is a composite request that
uses "aio_scandir" to recurse into and rmdir directories, and unlink
everything else.
aio_fcntl $fh, $cmd, $arg, $callback->($status)
aio_ioctl $fh, $request, $buf, $callback->($status)
These work just like the "fcntl" and "ioctl" built-in functions,
except they execute asynchronously and pass the return value to the
callback.
Both calls can be used for a lot of things, some of which make more
sense to run asynchronously in their own thread, while some others
make less sense. For example, calls that block waiting for external
events, such as locking, will also lock down an I/O thread while it
is waiting, which can deadlock the whole I/O system. At the same
time, there might be no alternative to using a thread to wait.
So in general, you should only use these calls for things that do
(filesystem) I/O, not for things that wait for other events
(network, other processes), although if you are careful and know
what you are doing, you still can.
The following constants are available (missing ones are, as usual
0):
"F_DUPFD_CLOEXEC",
"F_OFD_GETLK", "F_OFD_SETLK", "F_OFD_GETLKW",
"FIFREEZE", "FITHAW", "FITRIM", "FICLONE", "FICLONERANGE",
"FIDEDUPERANGE".
"FS_IOC_GETFLAGS", "FS_IOC_SETFLAGS", "FS_IOC_GETVERSION",
"FS_IOC_SETVERSION", "FS_IOC_FIEMAP".
"FS_IOC_FSGETXATTR", "FS_IOC_FSSETXATTR",
"FS_IOC_SET_ENCRYPTION_POLICY", "FS_IOC_GET_ENCRYPTION_PWSALT",
"FS_IOC_GET_ENCRYPTION_POLICY", "FS_KEY_DESCRIPTOR_SIZE".
"FS_SECRM_FL", "FS_UNRM_FL", "FS_COMPR_FL", "FS_SYNC_FL",
"FS_IMMUTABLE_FL", "FS_APPEND_FL", "FS_NODUMP_FL", "FS_NOATIME_FL",
"FS_DIRTY_FL", "FS_COMPRBLK_FL", "FS_NOCOMP_FL", "FS_ENCRYPT_FL",
"FS_BTREE_FL", "FS_INDEX_FL", "FS_JOURNAL_DATA_FL", "FS_NOTAIL_FL",
"FS_DIRSYNC_FL", "FS_TOPDIR_FL", "FS_FL_USER_MODIFIABLE".
"FS_XFLAG_REALTIME", "FS_XFLAG_PREALLOC", "FS_XFLAG_IMMUTABLE",
"FS_XFLAG_APPEND", "FS_XFLAG_SYNC", "FS_XFLAG_NOATIME",
"FS_XFLAG_NODUMP", "FS_XFLAG_RTINHERIT", "FS_XFLAG_PROJINHERIT",
"FS_XFLAG_NOSYMLINKS", "FS_XFLAG_EXTSIZE", "FS_XFLAG_EXTSZINHERIT",
"FS_XFLAG_NODEFRAG", "FS_XFLAG_FILESTREAM", "FS_XFLAG_DAX",
"FS_XFLAG_HASATTR",
aio_sync $callback->($status)
Asynchronously call sync and call the callback when finished.
aio_fsync $fh, $callback->($status)
Asynchronously call fsync on the given filehandle and call the
callback with the fsync result code.
aio_fdatasync $fh, $callback->($status)
Asynchronously call fdatasync on the given filehandle and call the
callback with the fdatasync result code.
If this call isn't available because your OS lacks it or it couldn't
be detected, it will be emulated by calling "fsync" instead.
aio_syncfs $fh, $callback->($status)
Asynchronously call the syncfs syscall to sync the filesystem
associated to the given filehandle and call the callback with the
syncfs result code. If syncfs is not available, calls sync(), but
returns -1 and sets errno to "ENOSYS" nevertheless.
aio_sync_file_range $fh, $offset, $nbytes, $flags, $callback->($status)
Sync the data portion of the file specified by $offset and $length
to disk (but NOT the metadata), by calling the Linux-specific
sync_file_range call. If sync_file_range is not available or it
returns ENOSYS, then fdatasync or fsync is being substituted.
$flags can be a combination of
"IO::AIO::SYNC_FILE_RANGE_WAIT_BEFORE",
"IO::AIO::SYNC_FILE_RANGE_WRITE" and
"IO::AIO::SYNC_FILE_RANGE_WAIT_AFTER": refer to the sync_file_range
manpage for details.
aio_pathsync $pathname, $callback->($status)
This request tries to open, fsync and close the given path. This is
a composite request intended to sync directories after directory
operations (E.g. rename). This might not work on all operating
systems or have any specific effect, but usually it makes sure that
directory changes get written to disc. It works for anything that
can be opened for read-only, not just directories.
Future versions of this function might fall back to other methods
when "fsync" on the directory fails (such as calling "sync").
Passes 0 when everything went ok, and -1 on error.
aio_msync $scalar, $offset = 0, $length = undef, flags = MS_SYNC,
$callback->($status)
This is a rather advanced IO::AIO call, which only works on
mmap(2)ed scalars (see the "IO::AIO::mmap" function, although it
also works on data scalars managed by the Sys::Mmap or Mmap modules,
note that the scalar must only be modified in-place while an aio
operation is pending on it).
It calls the "msync" function of your OS, if available, with the
memory area starting at $offset in the string and ending $length
bytes later. If $length is negative, counts from the end, and if
$length is "undef", then it goes till the end of the string. The
flags can be either "IO::AIO::MS_ASYNC" or "IO::AIO::MS_SYNC", plus
an optional "IO::AIO::MS_INVALIDATE".
aio_mtouch $scalar, $offset = 0, $length = undef, flags = 0,
$callback->($status)
This is a rather advanced IO::AIO call, which works best on
mmap(2)ed scalars.
It touches (reads or writes) all memory pages in the specified range
inside the scalar. All caveats and parameters are the same as for
"aio_msync", above, except for flags, which must be either 0 (which
reads all pages and ensures they are instantiated) or
"IO::AIO::MT_MODIFY", which modifies the memory pages (by reading
and writing an octet from it, which dirties the page).
aio_mlock $scalar, $offset = 0, $length = undef, $callback->($status)
This is a rather advanced IO::AIO call, which works best on
mmap(2)ed scalars.
It reads in all the pages of the underlying storage into memory (if
any) and locks them, so they are not getting swapped/paged out or
removed.
If $length is undefined, then the scalar will be locked till the
end.
On systems that do not implement "mlock", this function returns -1
and sets errno to "ENOSYS".
Note that the corresponding "munlock" is synchronous and is
documented under "MISCELLANEOUS FUNCTIONS".
Example: open a file, mmap and mlock it - both will be undone when
$data gets destroyed.
open my $fh, "<", $path or die "$path: $!";
my $data;
IO::AIO::mmap $data, -s $fh, IO::AIO::PROT_READ, IO::AIO::MAP_SHARED, $fh;
aio_mlock $data; # mlock in background
aio_mlockall $flags, $callback->($status)
Calls the "mlockall" function with the given $flags (a combination
of "IO::AIO::MCL_CURRENT", "IO::AIO::MCL_FUTURE" and
"IO::AIO::MCL_ONFAULT").
On systems that do not implement "mlockall", this function returns
-1 and sets errno to "ENOSYS". Similarly, flag combinations not
supported by the system result in a return value of -1 with errno
being set to "EINVAL".
Note that the corresponding "munlockall" is synchronous and is
documented under "MISCELLANEOUS FUNCTIONS".
Example: asynchronously lock all current and future pages into
memory.
aio_mlockall IO::AIO::MCL_FUTURE;
aio_fiemap $fh, $start, $length, $flags, $count, $cb->(\@extents)
Queries the extents of the given file (by calling the Linux "FIEMAP"
ioctl, see <http://cvs.schmorp.de/IO-AIO/doc/fiemap.txt> for
details). If the ioctl is not available on your OS, then this
request will fail with "ENOSYS".
$start is the starting offset to query extents for, $length is the
size of the range to query - if it is "undef", then the whole file
will be queried.
$flags is a combination of flags ("IO::AIO::FIEMAP_FLAG_SYNC" or
"IO::AIO::FIEMAP_FLAG_XATTR" - "IO::AIO::FIEMAP_FLAGS_COMPAT" is
also exported), and is normally 0 or "IO::AIO::FIEMAP_FLAG_SYNC" to
query the data portion.
$count is the maximum number of extent records to return. If it is
"undef", then IO::AIO queries all extents of the range. As a very
special case, if it is 0, then the callback receives the number of
extents instead of the extents themselves (which is unreliable, see
below).
If an error occurs, the callback receives no arguments. The special
"errno" value "IO::AIO::EBADR" is available to test for flag errors.
Otherwise, the callback receives an array reference with extent
structures. Each extent structure is an array reference itself, with
the following members:
[$logical, $physical, $length, $flags]
Flags is any combination of the following flag values (typically
either 0 or "IO::AIO::FIEMAP_EXTENT_LAST" (1)):
"IO::AIO::FIEMAP_EXTENT_LAST", "IO::AIO::FIEMAP_EXTENT_UNKNOWN",
"IO::AIO::FIEMAP_EXTENT_DELALLOC", "IO::AIO::FIEMAP_EXTENT_ENCODED",
"IO::AIO::FIEMAP_EXTENT_DATA_ENCRYPTED",
"IO::AIO::FIEMAP_EXTENT_NOT_ALIGNED",
"IO::AIO::FIEMAP_EXTENT_DATA_INLINE",
"IO::AIO::FIEMAP_EXTENT_DATA_TAIL",
"IO::AIO::FIEMAP_EXTENT_UNWRITTEN", "IO::AIO::FIEMAP_EXTENT_MERGED"
or "IO::AIO::FIEMAP_EXTENT_SHARED".
At the time of this writing (Linux 3.2), this request is unreliable
unless $count is "undef", as the kernel has all sorts of bugs
preventing it to return all extents of a range for files with a
large number of extents. The code (only) works around all these
issues if $count is "undef".
aio_group $callback->(...)
This is a very special aio request: Instead of doing something, it
is a container for other aio requests, which is useful if you want
to bundle many requests into a single, composite, request with a
definite callback and the ability to cancel the whole request with
its subrequests.
Returns an object of class IO::AIO::GRP. See its documentation below
for more info.
Example:
my $grp = aio_group sub {
print "all stats done\n";
};
add $grp
(aio_stat ...),
(aio_stat ...),
...;
aio_nop $callback->()
This is a special request - it does nothing in itself and is only
used for side effects, such as when you want to add a dummy request
to a group so that finishing the requests in the group depends on
executing the given code.
While this request does nothing, it still goes through the execution
phase and still requires a worker thread. Thus, the callback will
not be executed immediately but only after other requests in the
queue have entered their execution phase. This can be used to
measure request latency.
IO::AIO::aio_busy $fractional_seconds, $callback->() *NOT EXPORTED*
Mainly used for debugging and benchmarking, this aio request puts
one of the request workers to sleep for the given time.
While it is theoretically handy to have simple I/O scheduling
requests like sleep and file handle readable/writable, the overhead
this creates is immense (it blocks a thread for a long time) so do
not use this function except to put your application under
artificial I/O pressure.
IO::AIO::WD - multiple working directories
Your process only has one current working directory, which is used by
all threads. This makes it hard to use relative paths (some other
component could call "chdir" at any time, and it is hard to control when
the path will be used by IO::AIO).
One solution for this is to always use absolute paths. This usually
works, but can be quite slow (the kernel has to walk the whole path on
every access), and can also be a hassle to implement.
Newer POSIX systems have a number of functions (openat, fdopendir,
futimensat and so on) that make it possible to specify working
directories per operation.
For portability, and because the clowns who "designed", or shall I
write, perpetrated this new interface were obviously half-drunk, this
abstraction cannot be perfect, though.
IO::AIO allows you to convert directory paths into a so-called
IO::AIO::WD object. This object stores the canonicalised, absolute
version of the path, and on systems that allow it, also a directory file
descriptor.
Everywhere where a pathname is accepted by IO::AIO (e.g. in "aio_stat"
or "aio_unlink"), one can specify an array reference with an IO::AIO::WD
object and a pathname instead (or the IO::AIO::WD object alone, which
gets interpreted as "[$wd, "."]"). If the pathname is absolute, the
IO::AIO::WD object is ignored, otherwise the pathname is resolved
relative to that IO::AIO::WD object.
For example, to get a wd object for /etc and then stat passwd inside,
you would write:
aio_wd "/etc", sub {
my $etcdir = shift;
# although $etcdir can be undef on error, there is generally no reason
# to check for errors here, as aio_stat will fail with ENOENT
# when $etcdir is undef.
aio_stat [$etcdir, "passwd"], sub {
# yay
};
};
The fact that "aio_wd" is a request and not a normal function shows that
creating an IO::AIO::WD object is itself a potentially blocking
operation, which is why it is done asynchronously.
To stat the directory obtained with "aio_wd" above, one could write
either of the following three request calls:
aio_lstat "/etc" , sub { ... # pathname as normal string
aio_lstat [$wd, "."], sub { ... # "." relative to $wd (i.e. $wd itself)
aio_lstat $wd , sub { ... # shorthand for the previous
As with normal pathnames, IO::AIO keeps a copy of the working directory
object and the pathname string, so you could write the following without
causing any issues due to $path getting reused:
my $path = [$wd, undef];
for my $name (qw(abc def ghi)) {
$path->[1] = $name;
aio_stat $path, sub {
# ...
};
}
There are some caveats: when directories get renamed (or deleted), the
pathname string doesn't change, so will point to the new directory (or
nowhere at all), while the directory fd, if available on the system,
will still point to the original directory. Most functions accepting a
pathname will use the directory fd on newer systems, and the string on
older systems. Some functions (such as "aio_realpath") will always rely
on the string form of the pathname.
So this functionality is mainly useful to get some protection against
"chdir", to easily get an absolute path out of a relative path for
future reference, and to speed up doing many operations in the same
directory (e.g. when stat'ing all files in a directory).
The following functions implement this working directory abstraction:
aio_wd $pathname, $callback->($wd)
Asynchonously canonicalise the given pathname and convert it to an
IO::AIO::WD object representing it. If possible and supported on the
system, also open a directory fd to speed up pathname resolution
relative to this working directory.
If something goes wrong, then "undef" is passwd to the callback
instead of a working directory object and $! is set appropriately.
Since passing "undef" as working directory component of a pathname
fails the request with "ENOENT", there is often no need for error
checking in the "aio_wd" callback, as future requests using the
value will fail in the expected way.
IO::AIO::CWD
This is a compiletime constant (object) that represents the process
current working directory.
Specifying this object as working directory object for a pathname is
as if the pathname would be specified directly, without a directory
object. For example, these calls are functionally identical:
aio_stat "somefile", sub { ... };
aio_stat [IO::AIO::CWD, "somefile"], sub { ... };
To recover the path associated with an IO::AIO::WD object, you can use
"aio_realpath":
aio_realpath $wd, sub {
warn "path is $_[0]\n";
};
Currently, "aio_statvfs" always, and "aio_rename" and "aio_rmdir"
sometimes, fall back to using an absolue path.
IO::AIO::REQ CLASS
All non-aggregate "aio_*" functions return an object of this class when
called in non-void context.
cancel $req
Cancels the request, if possible. Has the effect of skipping
execution when entering the execute state and skipping calling the
callback when entering the the result state, but will leave the
request otherwise untouched (with the exception of readdir). That
means that requests that currently execute will not be stopped and
resources held by the request will not be freed prematurely.
cb $req $callback->(...)
Replace (or simply set) the callback registered to the request.
IO::AIO::GRP CLASS
This class is a subclass of IO::AIO::REQ, so all its methods apply to
objects of this class, too.
A IO::AIO::GRP object is a special request that can contain multiple
other aio requests.
You create one by calling the "aio_group" constructing function with a
callback that will be called when all contained requests have entered
the "done" state:
my $grp = aio_group sub {
print "all requests are done\n";
};
You add requests by calling the "add" method with one or more
"IO::AIO::REQ" objects:
$grp->add (aio_unlink "...");
add $grp aio_stat "...", sub {
$_[0] or return $grp->result ("error");
# add another request dynamically, if first succeeded
add $grp aio_open "...", sub {
$grp->result ("ok");
};
};
This makes it very easy to create composite requests (see the source of
"aio_move" for an application) that work and feel like simple requests.
* The IO::AIO::GRP objects will be cleaned up during calls to
"IO::AIO::poll_cb", just like any other request.
* They can be canceled like any other request. Canceling will cancel
not only the request itself, but also all requests it contains.
* They can also can also be added to other IO::AIO::GRP objects.
* You must not add requests to a group from within the group callback
(or any later time).
Their lifetime, simplified, looks like this: when they are empty, they
will finish very quickly. If they contain only requests that are in the
"done" state, they will also finish. Otherwise they will continue to
exist.
That means after creating a group you have some time to add requests
(precisely before the callback has been invoked, which is only done
within the "poll_cb"). And in the callbacks of those requests, you can
add further requests to the group. And only when all those requests have
finished will the the group itself finish.
add $grp ...
$grp->add (...)
Add one or more requests to the group. Any type of IO::AIO::REQ can
be added, including other groups, as long as you do not create
circular dependencies.
Returns all its arguments.
$grp->cancel_subs
Cancel all subrequests and clears any feeder, but not the group
request itself. Useful when you queued a lot of events but got a
result early.
The group request will finish normally (you cannot add requests to
the group).
$grp->result (...)
Set the result value(s) that will be passed to the group callback
when all subrequests have finished and set the groups errno to the
current value of errno (just like calling "errno" without an error
number). By default, no argument will be passed and errno is zero.
$grp->errno ([$errno])
Sets the group errno value to $errno, or the current value of errno
when the argument is missing.
Every aio request has an associated errno value that is restored
when the callback is invoked. This method lets you change this value
from its default (0).
Calling "result" will also set errno, so make sure you either set $!
before the call to "result", or call c<errno> after it.
feed $grp $callback->($grp)
Sets a feeder/generator on this group: every group can have an
attached generator that generates requests if idle. The idea behind
this is that, although you could just queue as many requests as you
want in a group, this might starve other requests for a potentially
long time. For example, "aio_scandir" might generate hundreds of
thousands of "aio_stat" requests, delaying any later requests for a
long time.
To avoid this, and allow incremental generation of requests, you can
instead a group and set a feeder on it that generates those
requests. The feed callback will be called whenever there are few
enough (see "limit", below) requests active in the group itself and
is expected to queue more requests.
The feed callback can queue as many requests as it likes (i.e. "add"
does not impose any limits).
If the feed does not queue more requests when called, it will be
automatically removed from the group.
If the feed limit is 0 when this method is called, it will be set to
2 automatically.
Example:
# stat all files in @files, but only ever use four aio requests concurrently:
my $grp = aio_group sub { print "finished\n" };
limit $grp 4;
feed $grp sub {
my $file = pop @files
or return;
add $grp aio_stat $file, sub { ... };
};
limit $grp $num
Sets the feeder limit for the group: The feeder will be called
whenever the group contains less than this many requests.
Setting the limit to 0 will pause the feeding process.
The default value for the limit is 0, but note that setting a feeder
automatically bumps it up to 2.
SUPPORT FUNCTIONS
EVENT PROCESSING AND EVENT LOOP INTEGRATION
$fileno = IO::AIO::poll_fileno
Return the *request result pipe file descriptor*. This filehandle
must be polled for reading by some mechanism outside this module
(e.g. EV, Glib, select and so on, see below or the SYNOPSIS). If the
pipe becomes readable you have to call "poll_cb" to check the
results.
See "poll_cb" for an example.
IO::AIO::poll_cb
Process some requests that have reached the result phase (i.e. they
have been executed but the results are not yet reported). You have
to call this "regularly" to finish outstanding requests.
Returns 0 if all events could be processed (or there were no events
to process), or -1 if it returned earlier for whatever reason.
Returns immediately when no events are outstanding. The amount of
events processed depends on the settings of "IO::AIO::max_poll_req",
"IO::AIO::max_poll_time" and "IO::AIO::max_outstanding".
If not all requests were processed for whatever reason, the poll
file descriptor will still be ready when "poll_cb" returns, so
normally you don't have to do anything special to have it called
later.
Apart from calling "IO::AIO::poll_cb" when the event filehandle
becomes ready, it can be beneficial to call this function from loops
which submit a lot of requests, to make sure the results get
processed when they become available and not just when the loop is
finished and the event loop takes over again. This function returns
very fast when there are no outstanding requests.
Example: Install an Event watcher that automatically calls
IO::AIO::poll_cb with high priority (more examples can be found in
the SYNOPSIS section, at the top of this document):
Event->io (fd => IO::AIO::poll_fileno,
poll => 'r', async => 1,
cb => \&IO::AIO::poll_cb);
IO::AIO::poll_wait
Wait until either at least one request is in the result phase or no
requests are outstanding anymore.
This is useful if you want to synchronously wait for some requests
to become ready, without actually handling them.
See "nreqs" for an example.
IO::AIO::poll
Waits until some requests have been handled.
Returns the number of requests processed, but is otherwise strictly
equivalent to:
IO::AIO::poll_wait, IO::AIO::poll_cb
IO::AIO::flush
Wait till all outstanding AIO requests have been handled.
Strictly equivalent to:
IO::AIO::poll_wait, IO::AIO::poll_cb
while IO::AIO::nreqs;
This function can be useful at program aborts, to make sure
outstanding I/O has been done ("IO::AIO" uses an "END" block which
already calls this function on normal exits), or when you are merely
using "IO::AIO" for its more advanced functions, rather than for
async I/O, e.g.:
my ($dirs, $nondirs);
IO::AIO::aio_scandir "/tmp", 0, sub { ($dirs, $nondirs) = @_ };
IO::AIO::flush;
# $dirs, $nondirs are now set
IO::AIO::max_poll_reqs $nreqs
IO::AIO::max_poll_time $seconds
These set the maximum number of requests (default 0, meaning
infinity) that are being processed by "IO::AIO::poll_cb" in one
call, respectively the maximum amount of time (default 0, meaning
infinity) spent in "IO::AIO::poll_cb" to process requests (more
correctly the mininum amount of time "poll_cb" is allowed to use).
Setting "max_poll_time" to a non-zero value creates an overhead of
one syscall per request processed, which is not normally a problem
unless your callbacks are really really fast or your OS is really
really slow (I am not mentioning Solaris here). Using
"max_poll_reqs" incurs no overhead.
Setting these is useful if you want to ensure some level of
interactiveness when perl is not fast enough to process all requests
in time.
For interactive programs, values such as 0.01 to 0.1 should be fine.
Example: Install an Event watcher that automatically calls
IO::AIO::poll_cb with low priority, to ensure that other parts of
the program get the CPU sometimes even under high AIO load.
# try not to spend much more than 0.1s in poll_cb
IO::AIO::max_poll_time 0.1;
# use a low priority so other tasks have priority
Event->io (fd => IO::AIO::poll_fileno,
poll => 'r', nice => 1,
cb => &IO::AIO::poll_cb);
CONTROLLING THE NUMBER OF THREADS
IO::AIO::min_parallel $nthreads
Set the minimum number of AIO threads to $nthreads. The current
default is 8, which means eight asynchronous operations can execute
concurrently at any one time (the number of outstanding requests,
however, is unlimited).
IO::AIO starts threads only on demand, when an AIO request is queued
and no free thread exists. Please note that queueing up a hundred
requests can create demand for a hundred threads, even if it turns
out that everything is in the cache and could have been processed
faster by a single thread.
It is recommended to keep the number of threads relatively low, as
some Linux kernel versions will scale negatively with the number of
threads (higher parallelity => MUCH higher latency). With current
Linux 2.6 versions, 4-32 threads should be fine.
Under most circumstances you don't need to call this function, as
the module selects a default that is suitable for low to moderate
load.
IO::AIO::max_parallel $nthreads
Sets the maximum number of AIO threads to $nthreads. If more than
the specified number of threads are currently running, this function
kills them. This function blocks until the limit is reached.
While $nthreads are zero, aio requests get queued but not executed
until the number of threads has been increased again.
This module automatically runs "max_parallel 0" at program end, to
ensure that all threads are killed and that there are no outstanding
requests.
Under normal circumstances you don't need to call this function.
IO::AIO::max_idle $nthreads
Limit the number of threads (default: 4) that are allowed to idle
(i.e., threads that did not get a request to process within the idle
timeout (default: 10 seconds). That means if a thread becomes idle
while $nthreads other threads are also idle, it will free its
resources and exit.
This is useful when you allow a large number of threads (e.g. 100 or
1000) to allow for extremely high load situations, but want to free
resources under normal circumstances (1000 threads can easily
consume 30MB of RAM).
The default is probably ok in most situations, especially if thread
creation is fast. If thread creation is very slow on your system you
might want to use larger values.
IO::AIO::idle_timeout $seconds
Sets the minimum idle timeout (default 10) after which worker
threads are allowed to exit. SEe "IO::AIO::max_idle".
IO::AIO::max_outstanding $maxreqs
Sets the maximum number of outstanding requests to $nreqs. If you do
queue up more than this number of requests, the next call to
"IO::AIO::poll_cb" (and other functions calling "poll_cb", such as
"IO::AIO::flush" or "IO::AIO::poll") will block until the limit is
no longer exceeded.
In other words, this setting does not enforce a queue limit, but can
be used to make poll functions block if the limit is exceeded.
This is a very bad function to use in interactive programs because
it blocks, and a bad way to reduce concurrency because it is
inexact: Better use an "aio_group" together with a feed callback.
Its main use is in scripts without an event loop - when you want to
stat a lot of files, you can write something like this:
IO::AIO::max_outstanding 32;
for my $path (...) {
aio_stat $path , ...;
IO::AIO::poll_cb;
}
IO::AIO::flush;
The call to "poll_cb" inside the loop will normally return
instantly, but as soon as more thna 32 reqeusts are in-flight, it
will block until some requests have been handled. This keeps the
loop from pushing a large number of "aio_stat" requests onto the
queue.
The default value for "max_outstanding" is very large, so there is
no practical limit on the number of outstanding requests.
STATISTICAL INFORMATION
IO::AIO::nreqs
Returns the number of requests currently in the ready, execute or
pending states (i.e. for which their callback has not been invoked
yet).
Example: wait till there are no outstanding requests anymore:
IO::AIO::poll_wait, IO::AIO::poll_cb
while IO::AIO::nreqs;
IO::AIO::nready
Returns the number of requests currently in the ready state (not yet
executed).
IO::AIO::npending
Returns the number of requests currently in the pending state
(executed, but not yet processed by poll_cb).
SUBSECOND STAT TIME ACCESS
Both "aio_stat"/"aio_lstat" and perl's "stat"/"lstat" functions can
generally find access/modification and change times with subsecond time
accuracy of the system supports it, but perl's built-in functions only
return the integer part.
The following functions return the timestamps of the most recent stat
with subsecond precision on most systems and work both after
"aio_stat"/"aio_lstat" and perl's "stat"/"lstat" calls. Their return
value is only meaningful after a successful "stat"/"lstat" call, or
during/after a successful "aio_stat"/"aio_lstat" callback.
This is similar to the Time::HiRes "stat" functions, but can return full
resolution without rounding and work with standard perl "stat",
alleviating the need to call the special "Time::HiRes" functions, which
do not act like their perl counterparts.
On operating systems or file systems where subsecond time resolution is
not supported or could not be detected, a fractional part of 0 is
returned, so it is always safe to call these functions.
$seconds = IO::AIO::st_atime, IO::AIO::st_mtime, IO::AIO::st_ctime,
IO::AIO::st_btime
Return the access, modication, change or birth time, respectively,
including fractional part. Due to the limited precision of floating
point, the accuracy on most platforms is only a bit better than
milliseconds for times around now - see the *nsec* function family,
below, for full accuracy.
File birth time is only available when the OS and perl support it
(on FreeBSD and NetBSD at the time of this writing, although support
is adaptive, so if your OS/perl gains support, IO::AIO can take
advantage of it). On systems where it isn't available, 0 is
currently returned, but this might change to "undef" in a future
version.
($atime, $mtime, $ctime, $btime, ...) = IO::AIO::st_xtime
Returns access, modification, change and birth time all in one go,
and maybe more times in the future version.
$nanoseconds = IO::AIO::st_atimensec, IO::AIO::st_mtimensec,
IO::AIO::st_ctimensec, IO::AIO::st_btimensec
Return the fractional access, modifcation, change or birth time, in
nanoseconds, as an integer in the range 0 to 999999999.
Note that no accessors are provided for access, modification and
change times - you need to get those from "stat _" if required ("int
IO::AIO::st_atime" and so on will *not* generally give you the
correct value).
$seconds = IO::AIO::st_btimesec
The (integral) seconds part of the file birth time, if available.
($atime, $mtime, $ctime, $btime, ...) = IO::AIO::st_xtimensec
Like the functions above, but returns all four times in one go (and
maybe more in future versions).
$counter = IO::AIO::st_gen
Returns the generation counter (in practice this is just a random
number) of the file. This is only available on platforms which have
this member in their "struct stat" (most BSDs at the time of this
writing) and generally only to the root usert. If unsupported, 0 is
returned, but this might change to "undef" in a future version.
Example: print the high resolution modification time of /etc, using
"stat", and "IO::AIO::aio_stat".
if (stat "/etc") {
printf "stat(/etc) mtime: %f\n", IO::AIO::st_mtime;
}
IO::AIO::aio_stat "/etc", sub {
$_[0]
and return;
printf "aio_stat(/etc) mtime: %d.%09d\n", (stat _)[9], IO::AIO::st_mtimensec;
};
IO::AIO::flush;
Output of the awbove on my system, showing reduced and full accuracy:
stat(/etc) mtime: 1534043702.020808
aio_stat(/etc) mtime: 1534043702.020807792
MISCELLANEOUS FUNCTIONS
IO::AIO implements some functions that are useful when you want to use
some "Advanced I/O" function not available to in Perl, without going the
"Asynchronous I/O" route. Many of these have an asynchronous "aio_*"
counterpart.
$numfd = IO::AIO::get_fdlimit
This function is *EXPERIMENTAL* and subject to change.
Tries to find the current file descriptor limit and returns it, or
"undef" and sets $! in case of an error. The limit is one larger
than the highest valid file descriptor number.
IO::AIO::min_fdlimit [$numfd]
This function is *EXPERIMENTAL* and subject to change.
Try to increase the current file descriptor limit(s) to at least
$numfd by changing the soft or hard file descriptor resource limit.
If $numfd is missing, it will try to set a very high limit, although
this is not recommended when you know the actual minimum that you
require.
If the limit cannot be raised enough, the function makes a
best-effort attempt to increase the limit as much as possible, using
various tricks, while still failing. You can query the resulting
limit using "IO::AIO::get_fdlimit".
If an error occurs, returns "undef" and sets $!, otherwise returns
true.
IO::AIO::sendfile $ofh, $ifh, $offset, $count
Calls the "eio_sendfile_sync" function, which is like
"aio_sendfile", but is blocking (this makes most sense if you know
the input data is likely cached already and the output filehandle is
set to non-blocking operations).
Returns the number of bytes copied, or -1 on error.
IO::AIO::fadvise $fh, $offset, $len, $advice
Simply calls the "posix_fadvise" function (see its manpage for
details). The following advice constants are available:
"IO::AIO::FADV_NORMAL", "IO::AIO::FADV_SEQUENTIAL",
"IO::AIO::FADV_RANDOM", "IO::AIO::FADV_NOREUSE",
"IO::AIO::FADV_WILLNEED", "IO::AIO::FADV_DONTNEED".
On systems that do not implement "posix_fadvise", this function
returns ENOSYS, otherwise the return value of "posix_fadvise".
IO::AIO::madvise $scalar, $offset, $len, $advice
Simply calls the "posix_madvise" function (see its manpage for
details). The following advice constants are available:
"IO::AIO::MADV_NORMAL", "IO::AIO::MADV_SEQUENTIAL",
"IO::AIO::MADV_RANDOM", "IO::AIO::MADV_WILLNEED",
"IO::AIO::MADV_DONTNEED".
If $offset is negative, counts from the end. If $length is negative,
the remaining length of the $scalar is used. If possible, $length
will be reduced to fit into the $scalar.
On systems that do not implement "posix_madvise", this function
returns ENOSYS, otherwise the return value of "posix_madvise".
IO::AIO::mprotect $scalar, $offset, $len, $protect
Simply calls the "mprotect" function on the preferably AIO::mmap'ed
$scalar (see its manpage for details). The following protect
constants are available: "IO::AIO::PROT_NONE", "IO::AIO::PROT_READ",
"IO::AIO::PROT_WRITE", "IO::AIO::PROT_EXEC".
If $offset is negative, counts from the end. If $length is negative,
the remaining length of the $scalar is used. If possible, $length
will be reduced to fit into the $scalar.
On systems that do not implement "mprotect", this function returns
ENOSYS, otherwise the return value of "mprotect".
IO::AIO::mmap $scalar, $length, $prot, $flags, $fh[, $offset]
Memory-maps a file (or anonymous memory range) and attaches it to
the given $scalar, which will act like a string scalar. Returns true
on success, and false otherwise.
The scalar must exist, but its contents do not matter - this means
you cannot use a nonexistant array or hash element. When in doubt,
"undef" the scalar first.
The only operations allowed on the mmapped scalar are
"substr"/"vec", which don't change the string length, and most
read-only operations such as copying it or searching it with regexes
and so on.
Anything else is unsafe and will, at best, result in memory leaks.
The memory map associated with the $scalar is automatically removed
when the $scalar is undef'd or destroyed, or when the
"IO::AIO::mmap" or "IO::AIO::munmap" functions are called on it.
This calls the "mmap"(2) function internally. See your system's
manual page for details on the $length, $prot and $flags parameters.
The $length must be larger than zero and smaller than the actual
filesize.
$prot is a combination of "IO::AIO::PROT_NONE",
"IO::AIO::PROT_EXEC", "IO::AIO::PROT_READ" and/or
"IO::AIO::PROT_WRITE",
$flags can be a combination of "IO::AIO::MAP_SHARED" or
"IO::AIO::MAP_PRIVATE", or a number of system-specific flags (when
not available, the are 0): "IO::AIO::MAP_ANONYMOUS" (which is set to
"MAP_ANON" if your system only provides this constant),
"IO::AIO::MAP_LOCKED", "IO::AIO::MAP_NORESERVE",
"IO::AIO::MAP_POPULATE", "IO::AIO::MAP_NONBLOCK",
"IO::AIO::MAP_FIXED", "IO::AIO::MAP_GROWSDOWN",
"IO::AIO::MAP_32BIT", "IO::AIO::MAP_HUGETLB" or
"IO::AIO::MAP_STACK".
If $fh is "undef", then a file descriptor of -1 is passed.
$offset is the offset from the start of the file - it generally must
be a multiple of "IO::AIO::PAGESIZE" and defaults to 0.
Example:
use Digest::MD5;
use IO::AIO;
open my $fh, "<verybigfile"
or die "$!";
IO::AIO::mmap my $data, -s $fh, IO::AIO::PROT_READ, IO::AIO::MAP_SHARED, $fh
or die "verybigfile: $!";
my $fast_md5 = md5 $data;
IO::AIO::munmap $scalar
Removes a previous mmap and undefines the $scalar.
IO::AIO::mremap $scalar, $new_length, $flags = MREMAP_MAYMOVE[,
$new_address = 0]
Calls the Linux-specific mremap(2) system call. The $scalar must
have been mapped by "IO::AIO::mmap", and $flags must currently
either be 0 or "IO::AIO::MREMAP_MAYMOVE".
Returns true if successful, and false otherwise. If the underlying
mmapped region has changed address, then the true value has the
numerical value 1, otherwise it has the numerical value 0:
my $success = IO::AIO::mremap $mmapped, 8192, IO::AIO::MREMAP_MAYMOVE
or die "mremap: $!";
if ($success*1) {
warn "scalar has chanegd address in memory\n";
}
"IO::AIO::MREMAP_FIXED" and the $new_address argument are currently
implemented, but not supported and might go away in a future
version.
On systems where this call is not supported or is not emulated, this
call returns falls and sets $! to "ENOSYS".
IO::AIO::mlockall $flags
Calls the "eio_mlockall_sync" function, which is like
"aio_mlockall", but is blocking.
IO::AIO::munlock $scalar, $offset = 0, $length = undef
Calls the "munlock" function, undoing the effects of a previous
"aio_mlock" call (see its description for details).
IO::AIO::munlockall
Calls the "munlockall" function.
On systems that do not implement "munlockall", this function returns
ENOSYS, otherwise the return value of "munlockall".
IO::AIO::splice $r_fh, $r_off, $w_fh, $w_off, $length, $flags
Calls the GNU/Linux splice(2) syscall, if available. If $r_off or
$w_off are "undef", then "NULL" is passed for these, otherwise they
should be the file offset.
$r_fh and $w_fh should not refer to the same file, as splice might
silently corrupt the data in this case.
The following symbol flag values are available:
"IO::AIO::SPLICE_F_MOVE", "IO::AIO::SPLICE_F_NONBLOCK",
"IO::AIO::SPLICE_F_MORE" and "IO::AIO::SPLICE_F_GIFT".
See the splice(2) manpage for details.
IO::AIO::tee $r_fh, $w_fh, $length, $flags
Calls the GNU/Linux tee(2) syscall, see its manpage and the
description for "IO::AIO::splice" above for details.
$actual_size = IO::AIO::pipesize $r_fh[, $new_size]
Attempts to query or change the pipe buffer size. Obviously works
only on pipes, and currently works only on GNU/Linux systems, and
fails with -1/"ENOSYS" everywhere else. If anybody knows how to
influence pipe buffer size on other systems, drop me a note.
($rfh, $wfh) = IO::AIO::pipe2 [$flags]
This is a direct interface to the Linux pipe2(2) system call. If
$flags is missing or 0, then this should be the same as a call to
perl's built-in "pipe" function and create a new pipe, and works on
systems that lack the pipe2 syscall. On win32, this case invokes
"_pipe (..., 4096, O_BINARY)".
If $flags is non-zero, it tries to invoke the pipe2 system call with
the given flags (Linux 2.6.27, glibc 2.9).
On success, the read and write file handles are returned.
On error, nothing will be returned. If the pipe2 syscall is missing
and $flags is non-zero, fails with "ENOSYS".
Please refer to pipe2(2) for more info on the $flags, but at the
time of this writing, "IO::AIO::O_CLOEXEC", "IO::AIO::O_NONBLOCK"
and "IO::AIO::O_DIRECT" (Linux 3.4, for packet-based pipes) were
supported.
Example: create a pipe race-free w.r.t. threads and fork:
my ($rfh, $wfh) = IO::AIO::pipe2 IO::AIO::O_CLOEXEC
or die "pipe2: $!\n";
$fh = IO::AIO::memfd_create $pathname[, $flags]
This is a direct interface to the Linux memfd_create(2) system call.
The (unhelpful) default for $flags is 0, but your default should be
"IO::AIO::MFD_CLOEXEC".
On success, the new memfd filehandle is returned, otherwise returns
"undef". If the memfd_create syscall is missing, fails with
"ENOSYS".
Please refer to memfd_create(2) for more info on this call.
The following $flags values are available: "IO::AIO::MFD_CLOEXEC",
"IO::AIO::MFD_ALLOW_SEALING" and "IO::AIO::MFD_HUGETLB".
Example: create a new memfd.
my $fh = IO::AIO::memfd_create "somenameforprocfd", IO::AIO::MFD_CLOEXEC
or die "m,emfd_create: $!\n";
=item $fh = IO::AIO::eventfd [$initval, [$flags]]
This is a direct interface to the Linux eventfd(2) system call. The
(unhelpful) defaults for $initval and $flags are 0 for both.
On success, the new eventfd filehandle is returned, otherwise
returns "undef". If the eventfd syscall is missing, fails with
"ENOSYS".
Please refer to eventfd(2) for more info on this call.
The following symbol flag values are available:
"IO::AIO::EFD_CLOEXEC", "IO::AIO::EFD_NONBLOCK" and
"IO::AIO::EFD_SEMAPHORE" (Linux 2.6.30).
Example: create a new eventfd filehandle:
$fh = IO::AIO::eventfd 0, IO::AIO::EFD_CLOEXEC
or die "eventfd: $!\n";
$fh = IO::AIO::timerfd_create $clockid[, $flags]
This is a direct interface to the Linux timerfd_create(2) system
call. The (unhelpful) default for $flags is 0, but your default
should be "IO::AIO::TFD_CLOEXEC".
On success, the new timerfd filehandle is returned, otherwise
returns "undef". If the timerfd_create syscall is missing, fails
with "ENOSYS".
Please refer to timerfd_create(2) for more info on this call.
The following $clockid values are available:
"IO::AIO::CLOCK_REALTIME", "IO::AIO::CLOCK_MONOTONIC"
"IO::AIO::CLOCK_CLOCK_BOOTTIME" (Linux 3.15)
"IO::AIO::CLOCK_CLOCK_REALTIME_ALARM" (Linux 3.11) and
"IO::AIO::CLOCK_CLOCK_BOOTTIME_ALARM" (Linux 3.11).
The following $flags values are available (Linux 2.6.27):
"IO::AIO::TFD_NONBLOCK" and "IO::AIO::TFD_CLOEXEC".
Example: create a new timerfd and set it to one-second repeated
alarms, then wait for two alarms:
my $fh = IO::AIO::timerfd_create IO::AIO::CLOCK_BOOTTIME, IO::AIO::TFD_CLOEXEC
or die "timerfd_create: $!\n";
defined IO::AIO::timerfd_settime $fh, 0, 1, 1
or die "timerfd_settime: $!\n";
for (1..2) {
8 == sysread $fh, my $buf, 8
or die "timerfd read failure\n";
printf "number of expirations (likely 1): %d\n",
unpack "Q", $buf;
}
($cur_interval, $cur_value) = IO::AIO::timerfd_settime $fh, $flags,
$new_interval, $nbw_value
This is a direct interface to the Linux timerfd_settime(2) system
call. Please refer to its manpage for more info on this call.
The new itimerspec is specified using two (possibly fractional)
second values, $new_interval and $new_value).
On success, the current interval and value are returned (as per
"timerfd_gettime"). On failure, the empty list is returned.
The following $flags values are available:
"IO::AIO::TFD_TIMER_ABSTIME" and "IO::AIO::TFD_TIMER_CANCEL_ON_SET".
See "IO::AIO::timerfd_create" for a full example.
($cur_interval, $cur_value) = IO::AIO::timerfd_gettime $fh
This is a direct interface to the Linux timerfd_gettime(2) system
call. Please refer to its manpage for more info on this call.
On success, returns the current values of interval and value for the
given timerfd (as potentially fractional second values). On failure,
the empty list is returned.
EVENT LOOP INTEGRATION
It is recommended to use AnyEvent::AIO to integrate IO::AIO
automatically into many event loops:
# AnyEvent integration (EV, Event, Glib, Tk, POE, urxvt, pureperl...)
use AnyEvent::AIO;
You can also integrate IO::AIO manually into many event loops, here are
some examples of how to do this:
# EV integration
my $aio_w = EV::io IO::AIO::poll_fileno, EV::READ, \&IO::AIO::poll_cb;
# Event integration
Event->io (fd => IO::AIO::poll_fileno,
poll => 'r',
cb => \&IO::AIO::poll_cb);
# Glib/Gtk2 integration
add_watch Glib::IO IO::AIO::poll_fileno,
in => sub { IO::AIO::poll_cb; 1 };
# Tk integration
Tk::Event::IO->fileevent (IO::AIO::poll_fileno, "",
readable => \&IO::AIO::poll_cb);
# Danga::Socket integration
Danga::Socket->AddOtherFds (IO::AIO::poll_fileno =>
\&IO::AIO::poll_cb);
FORK BEHAVIOUR
Usage of pthreads in a program changes the semantics of fork
considerably. Specifically, only async-safe functions can be called
after fork. Perl doesn't know about this, so in general, you cannot call
fork with defined behaviour in perl if pthreads are involved. IO::AIO
uses pthreads, so this applies, but many other extensions and (for
inexplicable reasons) perl itself often is linked against pthreads, so
this limitation applies to quite a lot of perls.
This module no longer tries to fight your OS, or POSIX. That means
IO::AIO only works in the process that loaded it. Forking is fully
supported, but using IO::AIO in the child is not.
You might get around by not *using* IO::AIO before (or after) forking.
You could also try to call the IO::AIO::reinit function in the child:
IO::AIO::reinit
Abandons all current requests and I/O threads and simply
reinitialises all data structures. This is not an operation
supported by any standards, but happens to work on GNU/Linux and
some newer BSD systems.
The only reasonable use for this function is to call it after
forking, if "IO::AIO" was used in the parent. Calling it while
IO::AIO is active in the process will result in undefined behaviour.
Calling it at any time will also result in any undefined (by POSIX)
behaviour.
LINUX-SPECIFIC CALLS
When a call is documented as "linux-specific" then this means it
originated on GNU/Linux. "IO::AIO" will usually try to autodetect the
availability and compatibility of such calls regardless of the platform
it is compiled on, so platforms such as FreeBSD which often implement
these calls will work. When in doubt, call them and see if they fail wth
"ENOSYS".
MEMORY USAGE
Per-request usage:
Each aio request uses - depending on your architecture - around 100-200
bytes of memory. In addition, stat requests need a stat buffer (possibly
a few hundred bytes), readdir requires a result buffer and so on. Perl
scalars and other data passed into aio requests will also be locked and
will consume memory till the request has entered the done state.
This is not awfully much, so queuing lots of requests is not usually a
problem.
Per-thread usage:
In the execution phase, some aio requests require more memory for
temporary buffers, and each thread requires a stack and other data
structures (usually around 16k-128k, depending on the OS).
KNOWN BUGS
Known bugs will be fixed in the next release :)
KNOWN ISSUES
Calls that try to "import" foreign memory areas (such as "IO::AIO::mmap"
or "IO::AIO::aio_slurp") do not work with generic lvalues, such as
non-created hash slots or other scalars I didn't think of. It's best to
avoid such and either use scalar variables or making sure that the
scalar exists (e.g. by storing "undef") and isn't "funny" (e.g. tied).
I am not sure anything can be done about this, so this is considered a
known issue, rather than a bug.
SEE ALSO
AnyEvent::AIO for easy integration into event loops, Coro::AIO for a
more natural syntax.
AUTHOR
Marc Lehmann <schmorp@schmorp.de>
http://home.schmorp.de/